623153
24
Zoom out
Zoom in
Previous page
1/94
Next page
24
GB
g) Use the power tool, accessories and tool bits etc.
in accordance with theseinstructions, taking into
account the working conditions and the work to
beperformed. Use of the power tool for operations
dierent from those intended couldresult in a ha-
zardous situation.
5) Service
a) Have your power tool serviced by a qualied repair
person using only identicalreplacement parts.
This will ensure that the safety of the power tool is
maintained.
Safety instructions Duplex grinding
machine
Operation is only allowed with a safety
switch against stray current (RCD max. stray
current of 30mA).
The machine must be plugged to 230 Vwith 16
A fuse.
Wear ear protectors. Exposure to noise can cause
hearing loss.
Wear protective glasses
WARNING The dust produced when using this tool may
be harmful to health. Do not inhale the dust. Use a dust
absorption system and wear a suitable dust protection
mask. Remove deposited dust thoroughly, e.g. with a
vacuum cleaner.
The power tool must stand or be xed to a horizontal and
level surface (e.g. work table)
Switch the machine oand unplug it when unattended.
Check all screw and plug-in connections and
protective equipment if rm and tightened
properly and whether all moving parts are
running smooth whenever the appliance is to be
put into operation.
The protective equipment on the appliance is
strictly prohibited to be disassembled, changed,
used in conict with the designation and it is
prohibited to attach any protective equipment of
other manufacturers.
The appliance must not be used if damaged
or safety equipment is defective. Replace any
worn-out and damaged parts.
Any defect on the power tool, including on the protective
equipment or abrasive wheel must be reported to a safety
engineer immediately after it is identied.
Before use check machine, cable, and plug for any dama-
ges or material fatigue. Repairs should only be carried out
by authorised Service Agents.
c) Prevent unintentional starting. Ensure the switch
is in the o-position beforeconnecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with yournger on the
switch or energising power tools that havethe switch
on invites accidents.
d) Remove any adjusting key or wrench before turning
the power tool on. A wrenchor a key left attached to
a rotating part of the power tool may result in personal
injury.
e) Do not overreach. Keep proper footing and balance
at all times. This enables bettercontrol of the power
tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or jewel-
lery. Keep your hair, clothingand gloves away from
moving parts. Loose clothes, jewellery or long hair
can becaught in moving parts.
g) If devices are provided for the connection of dust
extraction and collectionfacilities, ensure these are
connected and properly used. Use of dust collection
canreduce dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power
tool for your application. Thecorrect power tool will
do the job better and safer at the rate for which it was
designed.
b) Do not use the power tool if the switch does not
turn it on and o. Any power toolthat cannot be
controlled with the switch is dangerous and must be
repaired.
c) Disconnect the plug from the power source and/
or the battery pack from thepower tool before
making any adjustments, changing accessories, or
storingpower tools. Such preventive safety measures
reduce the risk of starting the powertool accidentally.
d) Store idle power tools out of the reach of children
and do not allow personsunfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained
users.
e) Maintain power tools. Check for misalignment or
binding of moving parts,breakage of parts and any
other condition that may aect the power toolsope-
ration. If damaged, have the power tool repaired
before use.Many accidentsare caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharpcutting edges are
less likely to bind and are easier to control.
ENGLISH
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GDS 125 A - 55110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GDS 125 A - 55110 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 7,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info