624777

Gude GDM 1000 11420 Manual

11
Zoom out
Zoom in
Previous page
1/29
Next page
General Safety Instructions
Prior to the initial use of the unit, the operating instructions
should be read completely. If in doubt with regard to
connection and operation of the unit, consult the
manufacturer (servicing department).
FOLLOW THE INSTRUCTIONS BELOW CAREFULLY IN
ORDER TO SECURE A HIGH DEGREE OF SAFETY:
CAUTION!
• The unit shall always be fitted on the worktable
horizontally, safely and firmly.
• The workplace shall be kept clean and sufficiently lit.
• Never use the unit near easily flammable materials,
gases or liquids.
• Wear goggles, ear protectors and suitable protection
clothing. If necessary, use a breathing mask.
• Do not lean far forward.
Always take care that your posture is safe and avoid
losing your balance
• Do not overload the machine.
The machine operates better and safer under conditions
for which it was designed.
• Use proper tool.
Tools or auxiliary equipment should be used only for the
purpose for which they were intended.
• Always keep tools in good conditions.
• To achieve optimum results and ensure safety during
work it is essential to keep tools always sharp and
clean. It is necessary to meet instructions for lubrication
as well as for replacement of accessories.
• Make sure that your standing is stable when working
with the unit.
• Keep unauthorised persons, children in particular, away
from the working area.
• Keep the existing protection devices at places and
provide for their perfect functioning.
• Make sure that the power cable is not close to rotating
parts.
• Never leave the switched-on unit unattended. If you
depart from the unit, switch it off.
• If the unit is out of use, prior to maintenance/cleaning or
replacement of a tool, unplug it.
• After use, put away the adjusting key.
• Make sure that cleared for the setting tool used always,
before the machine is turned on.If the unit is out of use,
prior to maintenance/cleaning or replacement of a tool,
unplug it.
• Persons unable to operate the appliance due to their
physical, sensory or mental abilities or their
inexperience or lack of knowledge must not operate it.
• If the appliance or feeder cable show any sign of visible
damage the appliance must not be put into operation.
• If the feeder cable of the appliance is damaged it needs
to be replaced by the producer or an electrician.
• Repairs of the appliance can only be executed by an
electrician. There might be significant risks as a result of
unauthorised repairs.
• The same regulations apply for accessories.
Güde GmbH & Co. KG does not answer for damages
caused by:
• Appliance damage by mechanical influences and
overloading.
• Any changes to the appliance.
• Use for any other purpose than that described in the
Operating Instructions.
• Unconditionally follow all safety instructions to prevent
accidents and damage.
Emergency procedure
Conduct a first-aid procedure adequate to the injury and
summon qualified medical attendance as quickly as possible.
Protect the injured person from further harm and calm them
down.
For the sake of eventual accident, in accordance with
DIN 13164, a workplace has to be fitted with a first-aid kit.
It is essential to replace any used material in the first-aid
kit immediately after it has been used.
If you seek help,
state the following pieces of information:
5. Accident site
6. Accident type
7. Number of injured persons
8. Injury type(s)
Disposal
The disposal instructions are based on icons placed on the
appliance or its package. The description of the meanings
can be found in the “Marking” chapter.
Operating staff requirements
The operator must carefully read the Operating Instructions
before using the appliance.
Qualification
No special qualification is necessary for using the appliance
apart from detailed instruction by a qualified person.
Minimum age
The appliance may only be operated by persons over 16
years of age. An exception includes youngsters operating
the appliance within their professional education to achieve
necessary skills under teacher's supervision.
Training
Using the appliance only requires appropriate instructions by
a professional or reading the Operating Instructions. No
special training necessary.
Technical data
Connection 230 V
Frequency: 50 Hz
Motor power P1: 550 W
Max. turning length: 935 mm
Point height: 140 mm
Point wide: 600 - 2100 rev/min
-1
Turning diameter: Max. 280 mm
Weight: 70,5 kg
Transportation and Storage
The unit has been designed for stationary use.
Units out of use should be stored in a dry locked room.
Inspection and Maintenance Safety Instructions
The machine will serve as a sufficient aid only if maintained
and care for appropriately. Insufficient maintenance and care
may result in accidents and injuries.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GDM 1000 11420 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GDM 1000 11420 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info