628921

Gude GD 20 IE 85092 Manual

27
Zoom out
Zoom in
Previous page
1/56
Next page
7
GB
(see fi gure 7 e 8)
A. Upper shell, B. Fan guard.
(see fi gure 9)
A. Fuel Filter, B. Side cover, C. Fuel line.
(see fi gure 10)
A. Fuel Filter, Bushing, and Lower Fuel Line, B.Upper fuel line,
C. Side cover.
IGNITOR
1. Remove upper shell and fan guard (see fi gure 7-8).
2. Remove fan (see page 11).
3. Remove 4 side cover screws with a 5/16” nut driver. Remove
side cover (see Figure 9 or 10).
4. Disconnect ignitor wires (yellow) from ignition control
assembly (see Figure 11). Pull the ignitor wires up through
the hole in the lower shell.
5. Disconnect fuel line hose and air linehose. Remove photocell
from photocell bracket (see Figure 11).
6. Remove combustion chamber. Stand combustion chamber
on end with nozzle adapter bracket on top (see Figure 12).
7. Remove ignitor screw with a 1/4” nut driver. Carefully remove
ignitor from nozzle adapter bracket.
8. Carefully remove replacement ignitor from styrofoam
packing.
9. Carefully guide ignitor into opening in nozzle adapter bracket.
Do not strike ignitor element. Attach ignitor to nozzle adapter
bracket with screw using a 1/4” nut driver (see Figure
12).Torque .90 to 1.69 N-m (8 to 15 in-lbs) Do not over
torque.
10.Replace combustion chamber.
11.Route the ignitor wires back down through the hole in the
lower shell. Connect wires to the ignition control assembly.
12.Replace side cover (see Figure 9 or 10).
13.Connect and route fuel line hose and air line hose to burner
head. See Fuel and Air Line Replacement and Proper
Routing, page 11.
14.Replace photocell in photocell bracket. Route wires as
shown in either Figure 17, 18, or 19, page 11.
15.Replace fan (see page 13).
16.Replace fan guard and upper shell (see fi gure 7-8).
A.
B.
Figure 7-8 – Upper Shell Removal.
A.
B.
C.
Figure 9 – Fuel Filter Removal, 35.000 and 70.000 Btu/
Hr.
A.
B.
C.
Figure 10 – Fuel Filter Removal, 100.000 Btu/Hr.
SERVICE PROCEDURES
A.
B.
C.
D.
E.
F.
G.
H.
I.
L.
(see fi gure 11)
A.Combustion Chamber
B.Nozzle Adapter Bracket
C.Ignitor
D.Ignitor Wires
E.Ignition Control
Assembly
F.Side Cover
G.Photocell Assembly
H.Photocell Bracket
I.Fuel Line Hose
L.Air Line Hose
Figure 11 – Disconnecting Ignitor Wire sfrom Ignition
Control Assembly.
A.
B.
C.
D.
E.
F.
G.
(see fi gure 12)
A.Ignitor Screw/Washer
Assembly
B.Ignitor
C.Nozzle Adapter Bracket
D.Nozzle Adapter Bracket
Opening
E.Combustion Chamber
F.Photocell Bracket
G.Ignitor Element
Figure 12 – Ignitor Replacement
CAUTION: Do not bend or strike ignitor element. Handle
with care.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude GD 20 IE 85092 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude GD 20 IE 85092 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info