622184

Gude DREHSCHRAUBER - 40079 Manual

6
Zoom out
Zoom in
Previous page
1/16
Next page
GB
3
Warranty
Warranty claims according to the warranty certificate attached. .
Read the instruction manual before use Wear protection goggles Use ear protectors
4. Initial Operation
Fig. 2
• Remove the protection from the pressure air
connection neck (Fig. 1/ Pos. 4). Pack the slip
connection (Fig. 1/Pos. 10) with a Teflon tape
and screw on.
• Push the quick-acting chuck (Fig. 1/ Pos. 1) down
and turn a bit if necessary. Now it is possible to
put an extender (Fig. 1/Pos. 8 + 9) on the quick-
acting chuck (Fig. 1/ Pos. 1). Lock the extender in
place by means of the quick-acting chuck (Fig. 1/
Pos. 1).
• Switch from run to the right to run to the left by
lever (Fig. 1/Pos. 2), marked „F“and „R“.
• Now, connect the pneumatic screwdriver with a
slip clutch/quick-acting clutch (Fig. 1/Pos. 10) to
a suitable pneumatic hose and a compressor of
provided capacity.
• Pressing the starting lever (Fig. 1/Pos. 5), put the
pneumatic screwdriver in operation.
5. Maintenance and Care
Observance of the maintenance instructions guarantees a long service life of this premium quality product.
The pneumatic screwdriver must be lubricated regularly. Regarding lubrication, select one of the following
options:
a) Oil-mist providing oilcan: The maintenance kit includes an oil can producing oil mist. It should be
fitted on the compressor.
b) Oil piping: Install oil-piping immediately at the unit (at a distance of some ca 50 cm). I will supply
sufficient quantities of oil to the unit.
If the pneumatic screwdriver is out of operation for several days, drop 5-10 drops of special oil in
the pr
essure air connection before re-starting.
c) Manual lubrication
If there is not a maintenance kit or the oil piping on your unit, 3-5 drops of special oil must be put in your
impact scre
wdriver air connection before any operation. Store your pneumatic screwdriver at dry places
only.
6. Drawing
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude DREHSCHRAUBER - 40079 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude DREHSCHRAUBER - 40079 in the language / languages: English, German as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info