624538

Gude DHH 1050-7 TCW 01996 Manual

11
Zoom out
Zoom in
Previous page
1/65
Next page
Technical specifications:
Connection Engine power Splitting lift
Split wood length
(without splitting
cross)
Split wood length
(with splitting cross)
Hydraulic pressure
Splitting force Weight
Safety instructions
The appliance (#01996) meets EN 61000-3-11 requirements and is subject to special connection conditions. That means that use on
optionally selected connection points is inadmissible. The appliance can lead to occasional voltage fluctuations under unfavourable
power conditions. The appliance is only designated to be used for connection points not exceeding the maximum allowed impedance of
Zmax = 0,233 Ω. As a user, you must make sure your connection point on which you want to use the appliance meets the above-
mentioned requirements - after agreement with your electricity supplier if necessary.
General
For safety reasons, safety instructions mentioned in these Operating Instructions and instructions on the appliance regarding the
operation, maintenance and repairs must be respected and followed.
Operating personnel
Risks may be associated with using the log splitter. Therefore, only trained and experienced persons may handle and work
with the appliance. The operator must wear tight, close-fitting clothing and protective shoes.
Persons below 18 years of age must not work with the wood splitter. However, persons over 16 years of age may work with
the wood splitter to achieve the learning goal and if supervision by a professional is provided.
Place of work
To ensure safe wood splitting, it is necessary that the place of work is level and enables stability keeping and sufficient free movement.
All obstacles must be removed from access paths for carrying the splitter. Appropriate lighting of the place of work must be provided.
Work preparation
Electric current supply must be interrupted by unplugging the appliance and pressing the red button for repairs or servicing the log
splitter. Interrupting the electric current supply just by putting the switch to OFF is not enough. GÜDE log splitters are always
supplied with hardened splitting knives. However, if slight deformation of the knife edge after splitting wood containing invisible foreign
items, e.g. out of concrete, steel, etc., it must be removed by a file or grinding off. Keeping the splitting knife sharp at all times increases
the operating power.
TIP: Lubricate the splitting knife with grease from time to time (for problem wood).
Before the splitter is put into operation for the first time, it is necessary to check the safety devices (two-lever operation, in
particular).
CAUTION! Before the appliance is to be put into operation, make sure the splitter table is fitted safely on the splitter.
Technical specifications:
Technical specifications: 1050/7 TCW type 1050/8 TC type
Connection: 230 V~50 Hz 400 V~50 Hz
Engine power 3,5 kW P1 3.5 kW P1
Max. hydraulic pressure: 210 bar 210 bar
Max. splitting force: 7 tons 8 tons
Splitting post: 100 mm x 100 mm 100 mm x 100 mm
Max. splitting lift: 515 mm 515 mm
Max. split wood length:
1040 mm (without splitting
cross)
1,040 mm (without splitting
cross)
Max. split wood length:
1020 mm (without splitting
cross)
1,020 mm (without splitting
cross)
In table position – splits: ca. 540 mm 540 mm
Table size: ca. 310 mm x 300 mm 310 mm x 300 mm
Total height: ca. 1540 mm 1,540 mm
Total depth including operating
lever:
ca. 840 mm 900 mm
Total width: ca. 600 mm 600 mm
Weight: ca. 113 kg app. 121 kg
Article No. 01996 01963
11
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude DHH 1050-7 TCW 01996 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude DHH 1050-7 TCW 01996 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info