628590
21
Zoom out
Zoom in
Previous page
1/76
Next page
Filter Cleaning/Checks – Vario Nozzle Cleaning
Unscrew the adapter on the water supply connection and
pull out the filter sieve by narrow, flat pliers. Rinse the filter
sieve with water and insert it back in. A damaged sieve
needs to be replaced.
ATTENTION! Under no circumstances put the high-
pressure cleaner into operation if the filter sieve is
damaged or missing.
Use a thin wire to clean the Vario nozzle or to remove
potential obstructions. See below.
Defect Detection
The following table shows possible defects, their potential
causes and means of their remedies. If you are unable to
solve the problem nonetheless, approach a qualified
specialist.
Prior to maintenance and cleaning, turn the device
off and unplug it.
Danger of electric shock.
Symptom Possible cause Remedy
The engine
doesn’t start
The device is not
plugged into the
grid
Plug the device
into the grid
The socket is
defective
Use another
socket
The fuse has
blown
Replace the fuse
The extension
cord is damaged
Try to use the
device without the
extension cord
The engine
stops
The fuse has
blown
Replace the fuse
The network
voltage is not right
Check the network
voltage, it has to
correspond to the
type label
specifications
The fuse has
blown
Too weak a fuse Connect to an
electric circuit
which is properly
protected with
respect to the
high-pressure
cleaner
performance
Excessive
effective
pressure
The nozzle is
partly clogged
Clean the nozzle
Pulsing
pressure
There’s air in the
water hose or in
the pump
Turn the high-
pressure cleaner
off and let it run
with an open spray
gun and open
water faucet long
enough to reach
an even effective
pressure
The water supply
is incorrect
Check whether the
water supply
connection
corresponds to the
technical
specifications. The
smallest water
hose allowed has
the diameter of ½“
or
Ø 13mm
Clogged water
filter
Clean the water
filter
The water hose is
clamped or
broken
Straighten the
water hose
The pressure
is stable yet
too low
Worn-out nozzle Replace the
nozzle
Worn-out
Start/Stop valve
Pull the trigger 5
times in a quick
succession
The engine is
running, yet
there is no
effective
pressure
The water supply
is not connected
Connect to the
water supply
The filter is
clogged
Clean the filter
The high-
pressure
cleaner turns
on
spontaneously
The pump or the
spray gun leaks
Turn to an
authorized
specialist
The device is
not pressure-
tight
The pump is not
pressure-tight
6 drops per minute
are acceptable. In
cases of abnormal
leakage, it is
necessary to
consult the
problem with a
specialist
21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude 71121 GHD 140 SET at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude 71121 GHD 140 SET in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 6,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info