Manual Gude 400-10-50 N 50015 (page 12 of 68) (English, German, Dutch, French, Italian)

621180

Zoom out

Zoom in

1/68

ATTENTION!

 Keep your workplace clean and tidy. Disorder at

the workplace and on the work-table increases risk

of accident and injury.

 Pay attention to conditions of environment you

are working in. Do not use electric tools and

devices in a humid or wet environment. Ensure

sufficient lighting. Do not expose electric tools to rain

or high air humidity. Do not switch the electric tools

on in environments with flammable liquids or

inflammable gases.

 Do not allow unauthorised persons to get to the

machine. Keep visitors and spectators, especially

children and handicapped persons, in a safety

distance from your workplace.

 Ensure safe storage of tools. Tools and equipment

you do not need must be stored at an elevated

place, if possible, so that they were not accessible to

unauthorised persons.

 Always use correct equipment for all works.

Do not use e.g. small tools or accessories for works

that need to be executed by heavy equipment. Use

tools solely for purposes for which they have been

designed. Do not overburden the device!

 Pay attention to the electric cable.

Do not pull the cable. Pull the connector plug only

when pulling out of socket. Protect the cable against

heat sources, oil and sharp edges.

 Prevent from unintentional switching on.

Make always sure the switch on the device was in

the off position before connector plug is plugged in.

 Use special extension cables at outdoor works.

For outdoor works you need special extension

cables suitable for such works and with appropriate

marking.

 Stay concentrated at all times. Pay attention to

what you are doing.

Use common sense. Do not use the electric

equipment when you are tired.

 Pay attention to damaged parts. Check the device

before use. Are any parts damaged? In case of

small damage please consider whether the device is

really capable of perfect and safe working.

 Protect yourself against electric shocks.

Prevent any contact of your body with earthed

objects, e.g. water piping, heating elements, cookers

and fridges.

 Use approved parts only. Always use only identical

spare parts at maintenance and repairs. Spare parts

are available in an authorised service centre.

 Warning!

Any use of accessories and extensions not explicitly

recommended in these operating instructions may

result in a threat to persons and objects.

Safety Instructions for First Putting the Machine into

Operation

 The appliance meets EN 61000-3-11 requirements

and is subject to special connection conditions. That

means that use on optionally selected connection

points is inadmissible.

 The appliance can lead to occasional voltage

fluctuations under unfavourable power conditions.

 The appliance is only designated to be used for connection

points not exceeding the maximum allowed impedance of

max

= 0,233 Ω.

 As a user, you must make sure your connection point on

which you want to use the appliance meets the above-

mentioned requirements – after agreement with your

electricity supplier if necessary.

 Always pull the connector plug out of socket before machine

adjustment or maintenance.

 Children are prohibited to operate the machine.

 After packing removal check whether the device and all its

parts are in a perfect condition.

 Always wear protective glasses and hearing protection

aids

Always wear protective glasses and corresponding sight and

hearing protection aids. Never aim with compressed air

beam at your body or other persons or animals. Impurity

may be accelerated to a great extent by air flow and thus

become a dangerous shot.

 Always use protective equipment against electric shock

Never use the compressor near water or in a humid

environment.

 Put properly the compressor out of operation

Disconnect the compressor from power source and release

all pressure from the air jet before repair, inspection,

maintenance, cleaning or replacement of construction parts.

 Unintentional switching on

Do not transfer the compressor when connected to power

source or when the air jet is under pressure. Before

connecting the compressor to power source make sure the

pressure transducer switch is in the OFF position.

 Proper compressor storage

When the compressor is not in use it is necessary to

disconnect it from power source, store it at a dry place

protected against climatic influences. Keep it out of reach of

children.

 Working clothes

Do not wear wide clothes or jewellery as they can get caught

by machine parts.

 Careful compressor maintenance

It is necessary to follow the lubrication instructions (see

the throat for oil adding and oil level inspection in the

"Handling" chapter).

It is necessary to follow instructions concerning

protective cover in the air filter described in the

"Handling" chapter.

Check regularly the power cord. If damaged it needs to be

repaired or replaced in the service repair centre. Make sure

there is no outer visible damage of the compressor. In case

of need, please contact the nearest repair centre.

 Outdoor use

If use the compressor outside it is allowed to use extension

cables designed for outdoor use and with appropriate

marking only.

Attention: It is necessary to use a cable with sufficient

cross section (min. of 1.5 mm

); at cables longer than 10

m there may be starting problems at unfavourable

temperatures.

 Attention

Work considerately and use common sense. Do not use the

compressor if you are tired, impaired or intoxicated with

drugs causing tiredness.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude 400-10-50 N 50015 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude 400-10-50 N 50015 Manual

Product: