628793
10
Zoom out
Zoom in
Previous page
1/48
Next page
Inspections and Maintenance Schedule
Time
Interval
Description Other Details if Necessary
As needed
Clean the unit and grease the moving parts
Troubles – Causes - Troubleshooting
Trouble Cause Troubleshooting
Vehicle lifting
jack will not lift
or will not lift the
specific load.
Drain valve not closed properly.
Too little hydraulic oil in the system.
Air in the hydraulic system.
Valves not closed or contaminated.
Close the drain valve by turning the lifting lever to the right.
Replenish the hydraulic oil according to the description in the
manual.
De-aerate the system according to the description in the manual.
To rinse the valves, push the piston and close the drain valve
quickly. Lift the drain valve with hand and push and push the
piston down as fast as possible.
The lifting jack
will lower under
the weight of the
load.
Drain valve not closed properly.
Valves not closed or contaminated.
Close he drain valve by turning the lifting lever to the right
To rinse the valves, push the piston down and close the drain
valve. Lift the piston several times by hand, open the drain valve
and push the piston down as fast as possible.
Oil will escape
from the oil
screw.
Too much oil in the system Drain the required amount of oil from the filler hole. Mind the
regulations for the oil disposal.
Insufficient
pressure at
pumping
Too little hydraulic oil in the system.
Valves not closed or contaminated.
Pour the hydraulic oil in the filler hole.
To rinse the valves, push the piston down and close the drain
valve. Lift the piston with hand several times, close the drain
valve and push the piston down as fast as possible.
Lifting lever will
move up and
down under the
weight of the
load
Valves not closed or contaminated. To rinse the valves, push the piston down and close the drain
valve. Lift the piston with hand several times, close the drain
valve and push the piston down as fast as possible.
Vehicle lifting
jack unable to
reach the full
height
Too little hydraulic oil in the system.
Air in the hydraulic system.
Pour the hydraulic oil in the filler hole.
Open the drain valve, pump the lifting lever several times. Close
the drain valve, Repeat the procedure if necessary.
Service
Any technical questions? Complaint? Do you need spare parts or operation manual?
Go to our website www.guede.com and the section Service will help you quickly and without bureaucracy. Please, help us to help
you. In order to identify your device in case of complaint, please indicate serial number, order number and year of manufacture. All
information is available on the product label. To have all information always at hand, put them down.
Serial number:
Order number:
Year of manufacture:
Phone: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
Important information for the customer
Please be sure to know that returning the product in or after the warranty period must be made in the original packaging.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude 3T 18017 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude 3T 18017 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info