628784
10
Zoom out
Zoom in
Previous page
1/68
Next page
Use the hand cable winch only when all functions can be fully
evaluated and performed without any restriction or after
having received applicable instructions.
The device cannot be used for works other than for which the
device has been designed and that are specified in the
Operating Instructions. Any other use is a use in conflict with
the designation. The manufacturer will not be held liable for
any consequential damage and injuries. Please be sure to
know that the device has not been designed for industrial
purposes.
Assembly
Take the device and accessories out of the package and
check if the supply is complete.
Before being put into operation, a hand crank must be
installed to the cable winch. In doing so, proceed according to
the given model:
Hand crank installation for #55125
Put the hand crank on the crank shaft
Put the pressure plate on the crank shaft
Then, secure the hand crank with a nut.
Hand crank installation for #55126
Put the hand crank on the crank shaft
Respect the shown order of fixing materials and
tighten the screw (1) firmly to attach the hand crank.
1. Screw
2. Washer
3. Case
4. Spring
5. Hand crank
Hand cable winch installation on appropriate supporting
points
To increase the stability and safety, the winch must be
installed using 3 M10 screws, washers and blocking discs.
The hand cable winch must be fixed to stable supporting
points. The user is responsible for making sure the points are
dimensioned beyond the maximum tensile loading limit of the
hand cable winch. Adhere to the permitted device power
range.
_________________________________________________
_________________________________________________
_________________________________________________
CAUTION!
Never let the steel cable run overt the screw as shown above
– the cable is loaded incorrectly and gets worn out
excessively.
Before putting the device into operation
Please read carefully this manual and follow all instructions.
Use this manual to get familiarised with the device and its
operation. For your safety, follow the general safety
instructions. If handing the device to any other person, hand
the Operating Instructions, too. Familiarise with the device
before putting it into operation. First, test all device functions
without any load.
Operation
After the hand cable winch is properly assembled and
installed to stable supporting points, dimensioned beyond the
maximum tensile loading limit of the hand cable winch, the
device can be put into operation.
10
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude 360 kg 55125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude 360 kg 55125 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 2,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info