628807

Gude 24314 Manual

9
Zoom out
Zoom in
Previous page
1/41
Next page
2 = starting/functional lever
A = set screw
B = set nut
1. With the fork being lifted while pumping in the
NEUTRAL position, screw the set nut (A) on the set
screw (B) in the clockwise direction until the fork is
not going up by pumping and the NEUTRAL position
is not working as it usually does.
2. With the fork being lowered while pumping in the
NEUTRAL position, screw the set nut (B) counter-
clockwise until the fork has been fully lowered.
3. With the fork not being lowered and the functional
lever (2) being in the LOWER position, screw the
set nut (B) in the clockwise direction until the fork is
lowered by pressing the functional lever (2). Then the
NEUTRAL position needs to be checked as
described in steps 1 and 2 to make sure the nut has
been set properly.
4. With the fork not being lifted while pumping in the
LIFT position, set the nut (B) counter-clockwise until
the fork starts going up when pumping in the LIFT
position. Then check the LOWER and NEUTRAL
positions as described in steps 1 + 2 + 3.
Safe operation instructions
1. The user must read all warning instructions and
directions before using the truck.
2. Do not operate the forklift truck until being properly
familiarised with the appliance and receiving handling
instructions.
3. Do not operate the forklift truck until making sure it is
in a perfect condition. In particular, pay attention to
the wheels (L226, L306, L241), drawbar, fork,
pressure release lever (L345), etc.
4. Do not use the truck on a dirty or wet surface.
5. Do not use the forklift truck to transport persons.
6. The worker operating the truck should wear protective
gloves.
7. After loading the truck, all persons must be at least
600 mm from the fork.
8. Do not load the truck as is shown in pic. 2 B.
9. Do not exceed the maximum carrying load when
loading the truck.
10. The user should operate the forklift truck carefully
while meeting applicable local conditions at the same
time.
EU DECLARATION OF CONFORMITY
We,
Güde GmbH & Co. KG
Birkichstraße 6
D-74549 Wolpertshausen
herewith declare that the conception and construction of
the below-mentioned trucks and their design and type, as
brought into circulation by us, comply with the appropriate
basic safety and health requirements of the EU Directives.
In case of alternation of the truck, not agreed upon
by us, this declaration will lose its validity.
Machine description: Forklift truck
Article No. 24313, 24314
Date/authorised signature: 7 Jul, 2010
Title of signatory: Managing Director
Mr Arnold
Technical documentation: J. Bürkle FBL; QS
Applicable EU Directives:
2006/42 EG amendment I/05.06
Applicable harmonised standards:
EN 1757-2 :2001
ZEK 01.2-08/12.08
Place of certification:
TÜV Rheinland
Reference No.
01-ZLN-09832343 014
9
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude 24314 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude 24314 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info