628806

Gude 24313 Manual

8
Zoom out
Zoom in
Previous page
1/41
Next page
Keep the handles dry and with no signs of oil and grease.
Be careful!
Pay attention to what you are doing. Use common sense
when working. Do not use the truck when you are tired.
Check the truck for any damage!
Faultless working of the protection components or slightly
damaged parts needs to be carefully checked before the
truck is used.
Check whether the moving components are working
perfectly and are not getting jammed or whether some
parts are not damaged.
All components must be installed correctly and meet all
conditions for ensuring faultless operation of the truck.
Protection components and parts that are damaged need
to be professionally repaired in a certified specialised shop
or replaced unless provided otherwise in the Operating
Instructions.
WARNING!
Use of other insertion tools or accessories may result in a
risk of injury for you.
Have any truck repairs executed by professionals!
This truck corresponds to applicable safety provisions.
Repairs may only be executed by an expert, using original
spare parts. Otherwise, the user faces a risk of injury.
Special safety instructions
WARNING!
- The truck driver must make sure there is nobody in
the danger area before putting the truck into
operation, before operating it or before lifting the fork.
The entire truck (especially wheels and forks) must
be checked for any damage.
- Do not leave the truck on slopes and lower the forks
to the full extent.
- In case of emergency, the truck can be braked by
lowering the load.
- Before putting the load on the fork, the driver must
make sure the load has been fitted on the pallet
properly and that the maximum carrying load will not
be exceeded.
Marking
Product safety:
Product corresponds to
appropriate European
Community standards
Using the truck as designated
The truck described in these Operating Instructions is a
warehouse transport mean designated for lifting and
transporting load.
It needs to be used, maintained and operated in
accordance with these Operating Instructions. Any other
use is not in accordance with its designation and may
cause injury to persons or damage to the truck or physical
property. In particular, it is necessary to avoid overloading
caused by too heavy or unbalanced load. The binding
details of the maximum load are included on the type label
on the truck. The warehouse transport mean cannot be
used in a fire-dangerous, explosive or dusty environment
or spaces causing corrosion.
The operator must make sure the truck is only used in
accordance with its designation to prevent all types of risk
that would put life or health of the user or any third person
at risk. The operator must make sure that all users have
read and understood these Operating Instructions.
If the instructions in this manual are not followed, the
warranty expires. The same applies if the customer or any
third party has executed any unauthorised work on the
subject of the warranty not approved by the manufacturer's
customer service.
Installation of additional equipment in or on the truck with
interventions in the function of the transport mean is only
allowed after a written consent of the manufacturer.
The driver is responsible for the truck when being used. No
other persons can be taken in the truck. Any damage or
other failures of this warehouse transport mean must
immediately be reported to supervising workers.
The operating worker must make sure load is in a proper
condition. Appropriately fitted loads can only be
transported. If there is a risk that some parts of the load
could tip over or fall down, adequate protective measures
must be taken.
Operation
Starting mechanism setting
On the handle (1), there is the starting/functional lever that
can be set to 3 positions.
LOWERING = fork lowering
NEUTRAL = load transport
LIFT = fork lifting
These positions have been factory-set.
If reset, you can set them back by taking these
following steps.
8
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude 24313 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude 24313 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info