628790
8
Zoom out
Zoom in
Previous page
1/40
Next page
Servicing
Perform any servicing work after using and before storing the equipment. Servicing and repairs may only be executed by trained
professional staff.
(a) Clean the chain block thoroughly.
(b) Lubricate the chain block properly at all times. Lubricate the load hook chain and joint with oil.
(c) Protect the chain block against rain and moisture when storing the equipment.
Special attention must be paid to servicing when installing the chain block outdoors.
Chain and hook
The load hook and chain are made out of alloy steel and treated
thermally. Correction welding and thermal treatment on the load hook
and chain is strictly prohibited. This would result in changed material
properties.
(a) The chain life is sufficiently dimensioned. Nevertheless,
the life is shortened due to external influences.
If a length of 21 chain links given in table 1 is exceeded,
the chain must necessarily be replaced.
(b) The load hook gets deformed when handled unprofessionally
or when overloaded. The load hook must immediately be replaced
if the g dimension reaches the limit value specified in table 2.
Safety will not be guaranteed if the above-mentioned provision
is not provided.
Table 2: Hook opening
Hook opening (in inches)
Capacity
(ton)
Dimension (g)
new hooks
Replacement
when g=
½ 1- 3/16 1- 9/32
1 1- 5/16 1- 13/32
1,5 1- 7/16 1- 19/32
2 1- 11/16 1- 27/32
3 1- 11/16 1- 27/32
5 2- 15/32 2- 15/32
Gears arrangement during the installation process
For all chain blocks
The tooth (A) must be between the markings in the horizontal position.
One tooth must point to the centre while the other from the centre
outwards (see picture 2).
Warranty
Capacity
(ton)
Nominal
weight (kg)
Test weight
(kg)
½ 500 750
1 1000 1500
1 ½ 1500 2250
2 2000 3000
3 3000 4500
5 5000 7500
We herewith confirm that the product has been made under the supervi-
sion of our quality assurance and tested based on our quality require-
ments.
This is supported by our 2-year warranty. The warranty covers free prod-
uct repair if the failure has been caused by any construction element or if
the product is affected by any material, design or workmanship defect. To
review that, we need the product in the original condition (not disassem-
bled). Other claims, in particular, compensation of direct or indirect dam-
age, are excluded.
The warranty will not apply to any damage caused as a result of any
unauthorised use or overloading.
Table 1: Chain dimensions
Capacity
in tons
Chain
thick-
ness
Max. allowed dimension
½ 6.3 mm 21 chain links = 41.5 cm
1 6.3 mm 21 chain links = 41.5 cm
2 8.0 mm 21 chain links = 52.,5 cm
1.5 - 3 7.1 mm 21 chain links = 46 cm
5 8.0 mm 21 chain links = 52, cm
Length of 21 chain links
Mark
Mark
8
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gude 1000 KG 55103 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gude 1000 KG 55103 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info