Manual Gude 1-2 PROFI -36616 (page 10 of 56) (English, German, Dutch, French, Italian)

622102

Zoom out

Zoom in

1/56

Use as designated

Impact wrenches for loosening and tightening screws by

compressed air. See Technical specifications for the

tightening torque and loosening torque.

This appliance must not be used for any works other than for

which the appliance has been designed and that are

specified in the Operating Instructions.

Any other use will be considered a use in conflict with the

designation. The manufacturer will not be liable for any

consequential damage or injuries. Please be sure to know

that the appliance has not been designed for industrial

purposes.

Disposal

The disposal instructions are based on icons placed on the

appliance or its package. The description of the meanings

can be found in the “Marking“ section.

Transport package disposal

The package protects the appliance against damage during

transport. Packing materials are usually chosen depending

on their environmental friendliness and disposal method and

can therefore be recycled. Returning the package to material

circulation saves raw materials and reduces waste disposal

costs. Parts of packages (e.g. foils, styropor®) can be

dangerous to children. Risk of suffocation! Keep parts of

packages away from children and dispose them as soon as

possible.

Operator requirements

The operator must carefully read and understand the

Operating Instructions before using the appliance.

Qualification

No special qualification is necessary for using the appliance

apart from detailed instruction by an expert.

Minimum age

The appliance can only be operated by persons over 16

years of age. An exception includes youngsters operating

the appliance within their professional education to achieve

necessary skills under trainer's supervision.

Training

Using the appliance only requires appropriate instructions by

a professional or reading the Operating Instructions. No

special training necessary.

Storing

Keep the impact wrench in a dry, elevated and locked place

inaccessible to children.

Before starting the appliance

Air supply

Lubricate the appliance before putting it into operation

(see Servicing).

Assembly

Disconnect the air supply hose whenever you want to fit

socket nuts or extensions to the appliance or whenever you

want to undo them.

Safety instructions for the operator

• Do not use the appliance before reading carefully the

Operating Instructions.

• Follow all safety instructions given in the Operating

Instructions.

• Behave responsibly to other persons.

• Walk, do not run when working.

• Use the right working clothes at all times.

• Provide good stability.

Operation

Safety notice!

Wear protective glasses! Wear ear protectors!

Before daily operation, please drain water from the

compressor tank and blow out the condensate from the air

hose at all times.

Now start the compressor. The maximum operating pressure

of air is 6 bar.

The power (torque) of the impact wrenches under primary

working conditions is especially determined by three aspects:

a) Operating pressure applied

b) Duration of work step on the screw connection. The

normal working time for one screw connection is 3-5 seconds

on average.

c) Setting of the switch lever in relation to the screw

connection in proportion to the hammering time.

Due to the use of screws and materials of various hardness,

there as increased friction, which brings a higher torque

without a screw being tightened more firmly.

For rusty screw connections you should use an appropriate

rust dissolving agent before using the impact wrench. If

screw connections are still not loosened after 3-5 seconds of

hammering, a one degree higher impact wrench needs to be

used.

Do not overload the impact wrench to exceed the specified

performance limit as this would drastically shorten the

appliance life.

NOTE: The tightening torque on the screw connection is

directly connected with the screw firmness, appliance

revolutions, conditions of the power socket keys used and

time of using the impact wrench in the specific case of

screwing. Use the most direct and easiest connection

between the appliance and the power socket nut. Each extra

connection and extension absorbs and reduces the

appliance performance.

Picture B shows the setting of loosening torques.

Picture C shows the use of the impact wrench with a

mist lubricator.

Servicing and treatment

CAUTION: Follow the maintenance instructions

applicable to this appliance. Maintenance works not

specified in this document must be performed by

authorised servicing staff.

Lubrication

1. Disconnect the impact wrench from air supply.

2. Add 4-6 drops of GÜDE pneumatic oil, Art. No.40060

(we recommend the GÜDE mist lubricator, Art. No.

41354) or equivalent oil to the air inlet while the starter

is being pressed.

3. Now reconnect the appliance to the air supply and let it

run for app. 30 seconds to allow excessive oil to drain

off.

This lubrication process contributes to the reduction of

moisture, dust and dirt that get deposited in time in every

compressor when using it and reduce its performance. The

best protection against deposition is offered by integrated oil

tanks.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gude 1-2 PROFI -36616 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gude 1-2 PROFI -36616 Manual

Product: