751672
7
Zoom out
Zoom in
Previous page
1/28
Next page
-7-
TURNING THE E-SCOOTER ON/OFF:
Long press the power button (B) to turn on the E-Scooter. The LCD screen will light up.
Long press the power button (B) to turn off the E-Scooter. The LCD screen will turn off.
TURNING THE LIGHTS ON/OFF
Press the power button (B) shortly to activate or deactivate the headlight and the rear light.
The brake light will light always when you use the brake. The scooter is also equipped with
reection or reectors at the front, sides and rear.
STARTING TO RIDE
Slide the scooter with your foot for 1-2 meters and then press the gas throttle (11) for driving.
Release the gas throttle (11) and use the brake (2) for braking.
Important: Braking distance will extend during wet weather.
To change directions, lean slightly to the left or right and turn the handlebars slightly.
When the screen is on, press the << and >> buttons (A-C) to adjust the speed according to 1st,
2nd and 3rd class.
1st class max. speed up to 6 km/h (pedestrian mode)
2nd class max. speed up to 15 km/h
3rd class max. speed up to 25 km/h
Cruise Control: When riding at a xed speed for 6 seconds, Cruise Control is automatically
activated (you will hear a beep) and you can release the gas throttle. To cancel cruise control,
brake or press the gas throttle.
Please use the kickstand to keep your E-Scooter upright while parked or not in use.
BELL
The Guardo Pursuit Pro has a mechanical bell, you can ring to alert and warn the trafc around you.
SCREEN INFORMATION
1. Cruise Control ON
2. Alarm notication
3. Front light ON
4. Selected speed class
5. Odometer: total riding distance
6. Actual speed
7. Battery status
ADJUSTING THE BRAKE
Use the hex wrench anticlockwise to release the plate screws on back wheel.
Adjust the length of exposed tail: shorten for tightening and lengthen for loosing the brake.
Lock the pressure plate screws by rotating clockwise.
Note: Brake cables that are too loose will make it harder to brake. Test the tightness of your cables
by pulling each brake lever. If the levers hit the handlebars when you pull them, the brake cables
are too loose. Loosen the barrel adjusters, located where the brake cables meet the brake levers, for
minor brake cable adjustments. If the brake cable is still too loose, please contact your local reseller
for a qualied maintenance shop.
1. 2.
3.
4.
5.
6.
7.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Guardo Pursuit pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Guardo Pursuit pro in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info