639839
7
Zoom out
Zoom in
Previous page
1/25
Next page
-7-

 
2 le When the device has deviated too much to the right, press the
buon to the le to adjust the deviaon
right When the device has deviated too much to the le, press the
buon to the le to adjust the deviaon
3 up When the device has deviated too much to the back, press the
buon upwards to adjust the deviaon
down When the device has deviated too much to the front posion,
press the buon downwards to adjust the deviaon
10 up When the device has deviated too much downwards in altude,
press the buon upwards to adjust the deviaon
down When the device has deviated too much upwards in altude,
press the buon downwards to adjust the deviaon
11 le When the device has deviated too much to the right in rotaon,
press the buon to the le to adjust the deviaon
right When the device has deviated too much to the le in rotaon,
press the buon to the le to adjust the deviaon
You can adjust the speed of the drone in 3 levels (beginner – intermediate – advanced). The speed
can be controlled with the speed-switch (8).
This device can also make loopings. By pressing the Flip-buon (5) and indicang a direcon with
the right joysck controller, the drone will make a looping in the direcon you have indicated.
To turn the LED lights on or o, press the LED ON/OFF buon (7).
When turning the drone on it is standard in the normal mode. This means that its head (indicated
with FRONT) will always be the front direcon of the drone. Any direcon you command the
drone to y in, it will always keep the head as its front.
The device also has a Headless-mode. This means that the front of the device depends on the
direcon you’re ying in. This means that also the sides or the backside can be seen as the front.
To acvate this mode, press the LED ON/OFF (7) buon for a few seconds. To exit this mode, press
the LED ON/OFF buon (7) again for a few seconds.
            

The device has an Auto Return funcon. When you acvate this funcon, the drone will y the
own trajectory again in the opposite direcon to reach the original point of departure. You can
acvate the Auto Return funcon by pressing the Flip buon a few seconds.
Please note that the Auto return funcon does not calculate deviaons by wind or other sources.
The original point of departure may vary because of these phenomena.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Guardo DR100 Drone at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Guardo DR100 Drone in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info