629293
40
Zoom out
Zoom in
Previous page
1/48
Next page
40 — Installation & Programming Guide
The integral communicator gives digital alarm communication in Ademco fast, Ademco
superfast, Point ID and Paging (Mercury, Vodapage and Singapore) formats, and offers
additional upload/download capability. When programmed, the communicator can give
remote management when used in conjunction with GuardStation Remote (GSR) PC
software package.
The communicator can be programmed to work through a private exchange and paging
networks. Some private exchanges require a pause to be used, allowing the communicator
time to connect to the outside line e.g. 9 for outside line followed by a pause then the
number.
Some additional facilities can be accessed using special characters i.e. speed dial and
pager characters. e.g. * * then the number for the speed dial or short dial.
The # character can be used on certain pagers to give pauses or special features. To enter
the special characters in the phone number string, use the following keys -
represents #
represents pause (1 second)
represents *
The communicator will give 8 Tx channels to which any one or more of the following Tx
types can be assigned.
00 - Entry Alarm 03 - Normal Alarm 06 - Full Set 09 - Auxiliary Alarm
01 - Isolated Set 04 - Fire 07 - Mains Fail 10 - Tamper
02 - PA 05 - Line Fault 08 - Low Battery 11 - Verified Alarm
Refer to Tx Edit programming function 560.
The following Point ID codes are supported.
Fire Alarms Panic Alarms Burglar Alarms
110 Fire Alarm 121 Duress 130 Burglary
122 Silent Panic 131 Perimeter
24Hr non Burglary 123
Audible Panic
132 Interior
150 Auxiliary 133 24 hour
System Trouble 134 Entry/Exit
Open/Close 301 Mains Fail 137 Tamper
401 Set 302 Low System Volts 139 Verified Alarm
454 Exit Fail 351 Line Fault 145 Concentrator Tamper
146 Keypad Tamper
Test/Misc Event Log
601 Manual trigger test 625 Time/Date reset Bypasses
607 Walk test mode 570 Zone bypas
Once programmed, the communicator should be tested. A test call is initiated by
entering in engineer mode. Depending on the outcome of the test either
"COMM OK" or "COMM FAIL" will be recorded in the event log.
Communicator ProgrammingCommunicator Programming
Communicator ProgrammingCommunicator Programming
Communicator Programming
Installation & Programming
7 8
9
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Guardall WINDSOR SERIES 300i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Guardall WINDSOR SERIES 300i in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info