629293
28
Zoom out
Zoom in
Previous page
1/48
Next page
28 — Installation & Programming Guide
1 6
8
7
Output Programming
When programming the outputs, the output type should be selected directly as number
to and the polarity of the output can be selected as normal by pressing
or inverted by pressing .
Example Programming O/P 1
Press Current type and
Polarity
Press
1 - Detector Latch
2 - Detector Reset
3 - Entry/Exit Follow
4 - Bell Follow
5 - Walk Test
6 - Auxiliary
7 - Normal Polarity
8 - Inverted Polarity
Press To confirm selection.
If the O/P selection is changed, the polarity defaults to normal.
Note : For further information for O/Ps refer to page 9.
Note : some variants use O/P 2 as detector latch, others use O/P as bell follow.
1
TO
8
5
1 1
O/P 1 = DET RST
NORMAL POLARITY
O/P 1 = DET RST
O/P 1 = DET LTCH
O/P 1 = BEL FOL
O/P 1 = ENT/EXIT
O/P 1 = AUX ZONE
O/P 1 = WALK TST
INV. POLARITY
NORMAL POLARITY
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Guardall WINDSOR SERIES 300i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Guardall WINDSOR SERIES 300i in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info