629293
4
Zoom out
Zoom in
Previous page
1/48
Next page
4 — Installation & Programming Guide
This manual is intended for use with software version V1.3X
This Control Panel is microprocessor based and has 8 fully programmable zones. The
Panel is ideally suited for larger domestic or commercial installations. Expansion up to 32
zones is available using external expansion (concentrator 6 x 4 way) up to the maximum of
32 zones.There are 14 User Codes and one Engineer Code. The use of electronic keys is
available via the keypads as an alternative to a Pin Code. Each key must be programmed
onto the system by following the Pin Code change routine before it will function.
Each user code may be assigned a different authority level depending upon the level of
access required.
Authority Levels - Manager Set / Unset / Omit / Chime / Test / Change Pin /
Change Time / Edit Text / View Log / Remote
Access
Ordinary Set / Unset / Omit / Chime / Change Pin
Set Only Set / Change Pin
Duress Set / Unset / Change Pin/ Omit / Chime
The Panel has an integrated Smartdial communicator. This allows alarm reporting in
Ademco fast, Superfast, Point ID or paging formats. The communicator can also be used
for remote management if used in conjunction with the GuardStation Remote PC package.
An event log of 200 time and date stamped events is provided along with a real time clock.
The Panel will always retain its Set/Unset status in the event of a total power failure. This
means if the panel was set when power failed, when power is restored, the panel will be
automatically set. To allow detectors to stabilise, there is a one minute suspension of alarm
processing whilst the battery condition is checked. If the voltage is satisfactory, alarm
signals will again be processed. If when the panel is depowered set and a faulty battery is
fitted, the panel will not power up correctly. If this occurs, remove the battery and power up.
The panel will operate after one minute or on the first keypress.
Note : The engineer cannot log on to the panel in the Set condition
Prior to installing the control panel, the installation manual should be read and fully
understood.
Installation & Programming
IntroductionIntroduction
IntroductionIntroduction
Introduction
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Guardall WINDSOR SERIES 300i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Guardall WINDSOR SERIES 300i in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info