580331
10
Zoom out
Zoom in
Previous page
1/46
Next page
PX/QX/RX Version 4.20 User Manual – Issue B
- 10 -
Set
Code-02
The system can be partitioned into a number of parts called set groups, each of which can be
individually set. The programmed user authority level must allow setting and the programmed user
area access will determine which set groups are available to a user.
Setting can be started by:
1. A user request on a keypad
2. A user activating a keyswitch or radio Keyfob
3. Automatically by a timer schedule
4. Remotely from a PC using the Guardall GuardStation software
5. A user request on an ACM Proximity Reader.
Setting modes include:
1. Instant, where setting is completed immediately
2. Timed, where setting is completed at the end of the programmed exit time
3. Exit point, where setting is completed by opening and closing the final exit circuit
4. Push button, where setting is completed by pushing the external PB circuits after opening and
closing the final exit circuit
Your installation engineer should advise which of the above options have been programmed on your
system.
Setting from a keypad
02=Set
04=Test
Workshop
Seconds Left-005
1=Workshop
2=Office
1
0 2
12:00 Mon 27 Sep
Guardall
Workshop
Setting
Workshop
Set
12:00 Mon 27 Sep
Enter- ****
0 2 0 2
Log on set programmed
Log on set programmed, one group available
and no problems or warnings to display
Exit time
expired
Log off after set
not programmed
Log off after set
programmed
Setting with a Mini Keypad
The mini keypad has two quick set buttons. The actual areas or groups controlled
by the green and yellow buttons will depend on how the system has been
programmed by the installer. The green button
will set/unset the first programmed area or set
group and the yellow button
will set/unset the second programmed area or set group. Pressing
and holding both
and
will set the first and second group or area.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Guardall QX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Guardall QX in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Guardall QX

Guardall QX Installation Guide - English - 46 pages

Guardall QX User Manual - Dutch - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info