580330
19
Zoom out
Zoom in
Previous page
1/46
Next page
PX Version 5.0 - QX/RX Version 4.51 Installation Manual – Issue F
- 19 -
Technical Specification
EOL Resistor Connections
Type 1 EOL Network (Guardall) Type 2 EOL Network The EOL resistors are fitted in
the detector as shown. This
wiring arrangement applies to
all EOL inputs in the system.
Note: The diagram shows the
default values of 8k2//8k2. The
EOL resistor value can be
programmed (Refer to the
system options for details.).
8K2
8k2
C
1
PX
Detector
Alarm
Tamper
C
1
PX
Alarm
Tamper
R2
R1
Detector
EOL Network with Fault The EOL resistors are fitted in the detector as shown. Note
that most Guardall detectors have the necessary 3 EOL
resistors fitted on board. For full information refer to the
detector manual.
A fault EOL resistor may only be used if the system is
programmed to use the standard Guardall resistor network.
8K2
8k2
C
1
Panel
Detector
Alarm
Tamper
Aux.
8k2
The resistance for each possible state is shown in the table and can be displayed using the circuit
check mode function.
Circuit State Nominal Resistance
Tamper 0k
Clear 4k1
Alarm 8k2
Aux (Fault) 12k3
Aux+Alarm
(Mask)
16k4
Tamper >20k
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Guardall PX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Guardall PX in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Guardall PX

Guardall PX User Manual - English - 46 pages

Guardall PX Installation Guide - English - 46 pages

Guardall PX User Manual - English - 52 pages

Guardall PX Additional guide - Dutch - 42 pages

Guardall PX Additional guide - Dutch - 48 pages

Guardall PX Additional guide - Dutch - 52 pages

Guardall PX User Manual - Dutch - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info