580330
8
Zoom out
Zoom in
Previous page
1/46
Next page
PX Version 5.0 - QX/RX Version 4.51 Installation Manual – Issue F
- 8 -
Getting Started
In this manual you will learn how to;
Identify the components of the PX system
Connect components together
Make simple configuration changes
If you are new to the system it is recommended that you connect a basic system “on the bench” and
familiarise yourself with programming the panel. Before getting started ensure you have the following
components;
A control panel
A LCD keypad
A few meters of 4 core cable
A concentrator (optional)
Now follow these simple steps:
Connect +, -, A and B terminals of the keypad (CN6-XiB) to the panel XiB (refer to the
appropriate diagram in the panel section of this manual for details) using a length of 4
core cable. For simplicity of wiring adhere to the following colour coding;
+ Red
- Black
A Yellow
B Blue
Set the address of the concentrator to address 1 (DIL switches 1-6 all off (0))
Connect +, -, A and B terminals of the concentrator (CN2-XiB) to the panel XiB connector
using a length of 4 core cable using the same colour coding as used for the keypad
connections.
Connect the mains cable to the fused terminal block and apply power.
The keypad address must be set before it can be used on the system. To set the keypad
address, open the case so that the case tamper switch is activated. Press and hold the ? button until
the address prompt is displayed (approximately 4 seconds):
Address = ??
If the keypad has not been addressed then the prompt will be ?? or 99.
Press to exit address mode without change.
or
Address = 01
Press 01 to set the keypad address to 1, then press
to confirm
or
00:00 Sat 02 Jan
The keypad will then display the time/date and company name.
Guardall
PX KP Type-n
If the displayed message is as shown, or no bleep is heard, then the
keypad is not responding so check the bus connections.
Version 2.00
The keypad types are:
Description Type
Standard or with proximity reader 1
With 2 EOL circuit inputs 2
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Guardall PX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Guardall PX in the language / languages: English as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Guardall PX

Guardall PX User Manual - English - 46 pages

Guardall PX Installation Guide - English - 46 pages

Guardall PX User Manual - English - 52 pages

Guardall PX Additional guide - Dutch - 42 pages

Guardall PX Additional guide - Dutch - 48 pages

Guardall PX Additional guide - Dutch - 52 pages

Guardall PX User Manual - Dutch - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info