580330
23
Zoom out
Zoom in
Previous page
1/52
Next page
PX Control Panel User Manual – Issue C
- 23 -
When the panel exits test mode, either manually or automatically at the end of the test time then:
1. Any fire sensor still in alarm will give a normal alarm response.
2. Circuits with a 24-hour response, which are still in alarm, will be temporarily bypassed.
3. A warning will be displayed if any PA sensor is still in alarm.
Test Options
Comms Test
Code-5
If the comms test is selected then the panel will make a test call to all telephone numbers that have
been programmed for test by the installation engineer.
Engineer
Code-05
The Eng option will only be available if the system is configured for user authorised engineer access. This
option applies to both local and remote engineer access.
When the Eng option is selected the system will prompt for the engineer PIN code to be entered.
Engineer
Guardall
The engineer must log on within 2 minutes.
Press 7to cancel the engineer log on authorisation.
Once logged on the engineer working time is limited to 8 hours.
Code
Code-06
All users on the system are identified by a user code. A user code can be a PIN code, an electronic key
or proximity token. To change user code, log on to the keypad using your current code and choose the
code option. Then follow the display prompts. All user code changes are recorded in the system event
log.
Note: If the code option is not available this means that the system has been programmed to prevent
you from changing your user code, and a new code must be allocated by the security system manager.
New Code
Enter-
The chosen code may be any unique 4, 5 or 6 digit code.
If the entered code is not available the a warning message will be displayed.
New Code
Not Available
Re-enter Code
Enter-
The new code must be re-entered before being accepted by the system
New Code
Does not Match
If the re-entered code does not match a message will be displayed and the
system will prompt again for a new code.
New Code
Not Available
If the new code is not available you must choose another new code.
If a suitable keypad is used then the user code may be changed to either an electronic key or proximity
token. If you are changing code to an electronic key then insert the key when the system prompts for a
code. If you are changing code to a proximity token then present the token when the system prompts for
a code. When using a proximity token you will not be prompted to re-enter the code.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Guardall PX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Guardall PX in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Guardall PX

Guardall PX Installation Guide - English - 46 pages

Guardall PX User Manual - English - 46 pages

Guardall PX Installation Guide - English - 46 pages

Guardall PX Additional guide - Dutch - 42 pages

Guardall PX Additional guide - Dutch - 48 pages

Guardall PX Additional guide - Dutch - 52 pages

Guardall PX User Manual - Dutch - 31 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info