633022
13
Zoom out
Zoom in
Previous page
1/16
Next page
- IN CASE OF ALALRM.
- Press the “ON/OFF” button to disarm the system.
- Press the “PANIC” button to stop the alarm cycle without disarming (only with GT888).
- ALARMS CHECK CONTROL AND ANOMALIES.
LAST ALARM CAUSE:
If during the armed state an alarm has been detected (4 indicators flashes and 4 beeps
to the disarming) or there is anomaly it is possible to check the cause.
When the alarm is disarmed switch the ignition key on and check the LED flash as
indicated in the ALARMS SIGNAL TABLE and ANOMALIES SIGNALS TABLE.
ANOMALIES SIGNALLING:
- Vehicle low battery signalling: when disarming with the handset, if the vehicle battery is
at 11,6V doesn’t activate the indicators and after the normal acoustic signalling emits 5
anomaly beeps.
- Door open signalling when arming: the system emits a long beep and a long indicators
flash.
Handset low battery signalling: when the system is disarmed switch on the vehicle
ignition key athe system emits some flashes of colour GREEN and RED without pauses
(See TABLE ANOMALIES SIGNALLING).
ALARMS SIGNALLINGS TABLE
Check LED
Flashes No.
Input which has
generated the alarm
RED
PAUSE
1
ADDITIONAL MODULES
INPUT
RED
PAUSE
4
DOORS PIN SWITCHES
RED
PAUSE
5
BOOT/BONNET PIN
SWITCH
RED
PAUSE
6
VEHICLE IGNITION KEY
RED
PAUSE
7
WIRES CUT
(only for GT915/916)
ANOMALIES SIGNALLINGS TABLE
Check LED
Flashes No.
Input which has
triggered the alarm
RED / GREEN
HANDSETS BATTERY
COLOUR
N
N = Flashes No.
COLOUR = Flashes colour
LEGEND:
Flashes without pause
RED/GREEN
- The signals sequence of occurred alarms and anomalies detected is repeated at
each vehicle ignition key switching on.
- The alarms system memory is deleted to the following the alarm system arming.
- When the anomaly is solved, the memory is automatically deleted.
WARNING:
13
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for GT 917 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of GT 917 in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info