633020
5
Zoom out
Zoom in
Previous page
1/16
Next page
Install the two ultrasonic sensors on the “A” pillars (see pic below). One either side of the
windscreen pointing towards a hypothetical point at the centre of the rear window and
ensure that between the ultrasonics and the rear window there are no objects (i.e. headrest).
Plug the ultrasonics connectors in the module paying attention to their colours: RED and
WHITE. Do not cut or lengthen the ultrasonics cables. Plug the 4 pin BLACK loom connector
in the module. The module can be placed under the dashboard on the driver’s side.
Sensitivity increases if you turn the adjuster clockwise and decreases if you turn the
screw anticlockwise. NOTE:
This operation is important as
you do not want to have false
alarms. To check that it is not
oversensitive,arm the alarm
and hit the front and rear
windows with your hand (care
should be taken not do
damage the windows).The
system should not generate
any beep and flashes of the
LED on the receptacle.
A
M
P
A
M
P
AM
P
GT931
TRIMMER FOR THE
ULTRASONIC SENSITIVITY
ADJUSTMENT
RED
RED
ALARM
CONNECTOR
WHITE
WHITE
5.0 - GT931 ULTRASONIC MODULE CONNECTION (only x GT915)/917/
4.0 - INDICATOR COMMAND DIAGRAM
5
- The ORANGE wire connection as mentioned below has to be carried out only if the
function No.5 INDICATOR COMMAND IS ENABLED.
- When the ORANGE/BLACK wire connection is made you must use a 1N4007 diode.
VEHICLE HAZARD
BUTTON
INDICATORS
VEHICLE
WIRE
ORANGE
RED
BROWN
GREEN
ORANGE/BLACK
CM14
GT
ALARM
1N4007
DIODE
VEHICLE HAZARD
BUTTON
INDICATORS
VEHICLE
WIRE
ORANGE
ORANGE/BLACK
GT
ALARM
1N4007
DIODE
DIAGRAM FOR THE HAZARD
BUTTON WITH NEGATIVE
COMMAND
DIAGRAM FOR THE HAZARD
BUTTON WITH POSITIVE
COMMAND
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for GT 915 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of GT 915 in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info