633027
6
Zoom out
Zoom in
Previous page
1/16
Next page
6
3.0 - DESCRIPTION OF THE PROGRAMMABLE FUNCTIONS
4.0 - SET FUNCTIONS
WARNING:
- The alarm system must be disarmed.
1- Leave bonnet and the driver’s door opened.
2 - Turn the ignition key ON and leave it switched on for the whole procedure.
3 - Press the LED BUTTON until the system will emit a visual signal (indicators) and a long
acoustic signal to indicate that you have entered the SET FUNCTIONS mode. The LED
BUTTON will start flashing to indicate that it is possible to program/modify the alarm system
functions. If within 2 minutes the SET FUNCTIONS isn’t modified, the system will visualize
the SET FUNCTIONS condition and it will show their state in that moment by a flashings
sequence of the LED BUTTON, as indicated in the table below.
3.1 - Self-coding vehicle indicators impulses number.
When you enable this function it is possible to self-code the indicators flashes number to the
alarm system when doors are locking (system arming) and when doors are unlocking (system
disarming).
3.2 - Switches/Discriminators signals stabilizer.
When you activate this function it is possible to recognize these signals to the alarm system
if they would be of impulsive type (polling).
3.3 - Memorisation of switches/discriminators signals only after actuator signals.
When you enable or disable this function it is possible to decide if introduce the conditions for
vehicles with impulse switch after the actuator.
3.4 - Memorisation of actuator signals of changeable type.
When you enable or disable this function it is possible to decide if introduce the conditions for
vehicles with changeable actuator impulse switch.
3.5 - Anti-hijack door signal stabilizer.
When you activate this function it is possible to recognize to the alarm system these signals
if they would be of impulsive type (polling).
3.6 - Acoustic signal when arming/disarming the alarm system.
When you activate or deactivate this function it is possible to have the acoustic signal on
arming and disarming. This function is valid for vehicles with flashing indicators when the
original CDL is operated.
3.7 - Visual signal when arming/disarming the alarm system.
When you activate or deactivate this function it is possible to have visual signals on the
vehicles indicators on arming and disarming.
3.8 - Courtesy light switching on when disarming.
When you activate or deactivate this function it is possible to have the courtesy light switching
on for 15 seconds when disarming the alarm.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for GT 800-3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of GT 800-3 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info