633026
4
Zoom out
Zoom in
Previous page
1/16
Next page
14 - The RED/BROWN, YELLOW/BROWN, RED/GREY and YELLOW/GREY wires must be
connected to the original vehicle central door locking system as indicated on the vehicles
installation guides supplied by GT, or following the section DESCRIPTION OF THE ALARM
SYSTEM ARMING/DISARMING COMMAND WIRES (Page 8).
15 - Connect the GREEN/YELLOW wire to O/E vehicle earth to carry out the DOORS LOCK/
UNLOCK SIGNALS SELF-CODING procedure and to carry out the RAPID TEST (page 8-9).
16 - If you want to activate the ANTI-HIJACK FUNCTION connect the BLACK /WHITE wire to
the supplied N/O switch, connect the other side of the switch to earth.(refer to GENERAL
CONNECTION DIAGRAM page 5). Mount the button in a position not visible but easily
reachable.
17 - ULTRASONIC SENSOR: Install the two ultrasonic transducers at the top of the “A”
pillars, one to the right and one to the left (see picture) pointing towards a hypothetical point
at the centre of the rear window and ensure that between the ultrasonic transducers and the
rear window there are no objects (i.e. headrest, etc.).
Plug the ultrasonic tranducers in the suitable alarm connectors paying attention to their colours
(refer to GENERAL CONNECTION DIAGRAM page
5). To adjust the sensitivity of the ultrasonic sensor,
turn the adjuster close to the main alarm connector
clockwise to increase and anti clockwise to decrease.
Do not cut or lengthen the ultrasonic transducers
cables.
WARNING:
- When the installation has been completed, reconnect the O/E vehicle earth and
carry out the alarm system SET FUNCTIONS.
RED
ADJUSTMENT
WHITE
4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for GT 800-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of GT 800-2 in the language / languages: English as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info