ķ
12
Memory position buttons
“
1
–
“
6
Select range: U I, U II or U III.
Setting the station/RDS programme:
If the station/RDS programme tuned to is
already stored in the selected range on a pro-
gramme position button, for example, "U I",
the corresponding number is indicated on the
display.
Storing the set station/RDS programme:
Press the programme position button until the
signal sounds.
If "AF" is switched off, this setting is also
stored in memory.
Calling up stored stations/RDS programmes:
Press the programme position button briefly.
The contents of the memory position buttons
are preserved even if the car radio is dis-
connected from the operating voltage.
Alternative frequencies (AF)
The display indicates "AF"
You are receiving an RDS programme that
is being broadcast by several stations with
different frequencies.
Your car radio always selects automatically
the station with the alternative frequency
giving the best reception quality.
Switching off the AF function
When you are in an area with very poor recep-
tion conditions it may happen that short pau-
ses occur while the radio is searching for the
alternative frequencies. It is best in this case
to switch the AF function off.
Press the
¡
AF
button until the signal
sounds.
The "AF" function is switched off.
Reactivating the AF function
Press the
¡
AF
button until the signal
sounds. This is only possible with stations
broadcasting with alternative frequencies.
Radio
“
1
–
“
6
¢¢
¡
AF
