ķ
9
GB
Installation and removal
– Terminal 30: if you do not want the car radio
to be switched on and off with the ignition
switch. Do not connect contact blade A4!
A6 Illumination of the radio controls
Connect contact blade A6 to terminal 58
of
the vehicle:
When the headlights are on and the radio is
switched off, only the control buttons of the
car radio are illuminated.
A5
+12 V control voltage (max.0.5 A)
With a switched-on car radio, contact blade
A5.
For power aerials (extend and retract),
Amplifiers (switching on/off), aerial amplifier
(supply voltage) and so on.
A4
+12 V stand by voltage
Connect terminal 30
(permanent plus) of the
vehicle if you want to be able to switch the
radio on and off with the ignition switch. Also,
check blade contact A7.
A2 Telephone mute
Connection for a car telephone or CB radio:
The car radio is "muted" during the use of a
car telephone or CB radio. Blade contact A2 is
connected to the ground wire.
Connecting the aerial
Car radio with RS*:: Illustration o
Connect the aerial cable to aerial socket d.
Car radio without RS*
: Illustration a and O
If required, use the aerial adapter (a).
Fix the aerial adapter (
a) or the aerrial lead
(
O) in the plastic holder.
Speakers
Car radio without RS*: first »Inserting the
mounting frame«!
Contact blades B 1 bis B 8: Illustration
p
Maximum output power
to 4 Ω speakers:
Sine, DIN 45324 _______________ 4 x 15 W
Peak ________________________ 4 x 10 W
Front speakers
B3 right +B4right – (ground)
B5 left +B6left – (ground)
Rear speakers
B1 right +B2right – (ground)
B7 left +B8left – (ground)
Inserting the mounting frame
Car radio with RS*: Illustration o
Car radio without RS*: Illustration +
Insert mounting frame b into the radio space
a of the vehicle.
Bend flap c behind the radio space a (varies
according to vehicle type) as needed.
Inserting the car radio
Car radio with RS*:
Release System, on page3
Car radio without RS*: Illustration +
Slide the radio all the way into the mounting
frame b. The radio should lock into place.
Removing the car radio
Car radio with RS*:
Release System, on page3
Car radio without RS*: Illustration Ü
Insert both bows d all the way into the ope-
nings of the trim.
Press both bows outward
ɫ
and slowly pull
the radio out.
Safety fuse
Illustration ü (car radio without RS*: Illust-
ration
P)
Fuse 5 A/DIN 72581 (plugged) in the device.
*Release System (RS), on page 3
