164877

Grundig wkc 1201 vd Manual

8
Zoom out
Zoom in
Previous page
1/12
Next page
ķ
7
GB
Installation and Removal
Installation Material and Accessories
For the parts required for installation and the
available accessories ask your specialized
dealer.
Inserting the Mounting Frame
Illustration +
– Insert the mounting frame b into the
vehicle´s cut-out a.
– Bend the tabs c behind the cut-out a as
required (depending on the type of vehicle).
Connecting the Aerial
Illustrations o and p
– If required, use the aerial adapter (Fig. o).
– Fix the aerial adapter (Fig.
o) or the aerial
cable (Fig.
p) in the plastic holder.
The illustrations o – + referring to the
text are to be found at the beginning of
Supply Voltages
Contact blades A: 4, 5, 7, and 8
Figure
ül
A4 +12 V standby voltage
Connect to terminal 30 of the vehicle if you
wish to switch on/off the car radio via the
ignition lock (for this, see contact blade A7).
A5
+12 V control voltage, 1 A max.
Drive voltage for an automatic aerial (exten-
sion and retraction), power amplifier (on/off)
etc., and operating voltage for an aerial ampli-
fier.
A7 +12 V operating voltage
If you wish to switch the car radio on/off via
the ignition lock*:
Connect the contact blade A7 to the terminal
15 of the vehicle. The contact blade A4 then
must be connected to the terminal 30.
If you do not wish to connect the car radio via
the ignition lock:
Connect the contact blade A7 to the terminal
30 of the vehicle.
A8 negative (–) operating voltage
Connect to terminal 31 (earth) of the vehicle.
Loudspeakers
Contact blades B 1 to B 8.
Figure
ü
Maximum output power
with 4 Ω loudspeakers:
Sine power, DIN 45324 __________ 4 x 15 W
Peak power ___________________ 4 x 10 W
Front loudspeakers
B3 RH +B4RH – (earth)
B5 LH +B6LH – (earth)
Rear loudspeakers
B1 RH +B2RH – (earth)
B7 LH +B8LH – (earth)
* With vehicles of the VW/Audio company
and the car models later than 1991, swit-
ching on/off via the ignition lock is not pos-
sible.
Under no cirumstances connect the contact
blade A7 to the S-contact (PIN 4 of supply
plug – brown/red lead) of the vehicle.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig wkc 1201 vd at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig wkc 1201 vd in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info