711743

Grundig WK8680 Manual

16
Zoom out
Zoom in
Previous page
1/80
Next page
16
ENGLISH
Preparation
1 Remove all packaging and sticker materials
and dispose of them according to the applica-
ble legal regulations.
2 Before using the appliance for the first time,
clean all parts which come into contact with
water carefully. (See the “Cleaning and care”
section).
3 Completely roll out the power cord from the
cable coil
J
on the bottom of the base
K
.
Pass the power cord through the slot on the
base.
4 Clean the kettle well before initial use and dis-
card water of first two boiling cycles.
Operation
1 Push the lid release button
C
on the kettle to
open the lid
C
.
2 Fill the water tank
A
with water.
Notes
7
Do not place the water tank
A
on the base
J
while filling it with water.
7
Never fill the water tank
A
above the maxi-
mum level indicator or below the minimum
level indicator.
3 Close the lid
C
until it clicks into place.
4 Place the water tank
A
on the base
J
. Make
sure that it is placed in an upright and stable
position.
5 Insert the plug into the wall socket.
― The actual temperature of water will be
shown on the display.
6 Set the water temperature to any desired value
(40-100) by pressing the temperature setting
button
D
(+/-).
7 Push On/Off button
G
.A warning beep will
be heard once. The button’s light will be on
during operation. Once the desired tempera-
ture is attained, the light disappears and the
operation is finished. You will hear 3 warning
(beep) sounds.
8 If desired, the simmer function can be activated
by pressing button
F
.
– Indicator light of button
F
lights on.
7
If the simmer function is activated, the kettle
will restart the boiling process when the tem-
perature falls below the desired temperature.
After 30 minutes, simmer function will be can-
celled automatically.
7
Warm-keeping button
F
operates in a range
from 50 °C to 90 °C.
Note
7
Lid
C
should always be closed during the
boiling process; otherwise the kettle will not
switch off automatically.
Note
7
If you want to stop the boiling process manu-
ally, push the On/Off button
G
.
9 Disconnect the plug from the wall socket.
10 Take the water tank from the base
J
. Only
hold it by the handle
I
.
Caution
7
Do not open the lid
C
as hot water could
splash out. Make sure that no water splashes
onto the base.
11 Pour the water from the spout
B
to the cup
or glass you want to use.
Hints and Tips
7
If you want to continue the boiling process, re-
peat the procedure from 1 to 10.
7
Let the kettle cool down between each heating
process.
7
The kettle is equipped with a water filter
B
which filters out limestone and other residues
when the water is being poured out.
7
Use softened or filtered water to prevent lime
build-up.
OPERATION ______________________________
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig WK8680 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig WK8680 in the language / languages: English, German, Dutch, French, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info