16
CHANNEL SELECTION
________________________________________________________
Choosing a satellite channel
1 The channel position numbers can be entered directly using the numeric buttons »1...0« on
the remote control. Channel position numbers with several digits must be entered within a space
of 3 seconds.
2 The »P+/P– « buttons on the receiver or the »
,,..
« buttons on the remote control allow you
to switch ste
p-by-step to the next channel position.
3 To fast forward through the channel positions: kee
p the »P+/P– « buttons on the receiver or the
»
,,..
« buttons on the remote control pr
essed.
Note:
If there is no image on the screen of the TV set please check that the pre-programmed oscillator
frequency (e.g. 9.750 GHz for Astra and Eutelsat) conforms with the oscillator frequency of the
LNC used.
Correct the oscillator frequency of the LNC if necessary.
See page 36, under "LNC oscillator frequencies" in the “LNC set-up” sub-menu for information
on how this works.
