570243
10
Zoom out
Zoom in
Previous page
1/20
Next page
ENGLISH
10
Initial setup
When the device is connected to the mains
for the first time, »0:00« starts flashing and
»WELCOME TO ...« appears on the display.
Searching for and saving FM
stations
You can fill 20 presets with the FM radio stations
of your choice. If you assign the presets again,
the previously saved stations will be overwritten.
1 Switch on the device from stand-by mode
by pressing »8« on the remote control or
»ON/OFF« on the device.
2 Press »M« repeatedly until »FM« appears on
the display.
3 To tune stations automatically:
Press and hold » « or » «.
When you release the button, the automatic
search stops at the next station.
If RDS information is transmitted by the
broadcaster, then the device shows the sta-
tion name.
To tune stations manually
Move the frequency forward in brief steps by
repeatedly pressing » « or » «.
The frequency goes up or down in 50 kHz
steps.
4 Press »PROG«.
An available preset number flashes on the
display.
5 To select a preset number, press
» PRESET/ALBUM +« on the device or
» « or » « on the remote control within
5 seconds.
6 To store the selected channel press »PROG«
within 5 seconds.
Display: The stored station with the preset
number is shown.
7 To search and store more stations, repeat steps
3 to 6 as many times as necessary.
SETTINGS
---------------------------------------------------------------------------------------------------------------------------------------
Setting the time and date
1 Switch off the device by pressing »8« on the
remote control or »ON/OFF« on the device.
2 Press and hold down »PROG«.
– Display: »12 H« or »24 H« flashes.
3 Press » « or » « to chose 12 H or 24 H
mode and press »PROG« to confirm.
– Display: The hour flashes.
4 Press » « or » « briefly to set the hours
step by step or hold down to run through the
hours continuously and press »PROG« to con-
firm.
– Display: The minutes flash.
5 Press » « or » « briefly to set the minutes
step by step or hold down to run through the
minutes continuously and press »PROG« to
confirm.
– Display: The year flashes.
Note:
7
When the minute displays changes from
»59« to »00«, this does not affect the hour
display.
6 Press » « or » « briefly to set the year
step by step or hold down to run through the
years continuously and press »PROG« to con-
firm.
– Display: The month flashes.
7 Press » « or » « briefly to set the month
step by step or hold down to run through the
months continuously and press »PROG« to
confirm.
– Display: The day flashes.
8 Press » « or » « briefly to set the day step
by step or hold down to run through the days
continuously and press »PROG« to confirm.
– Display: The current time and date.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig Sonoclock 990 IP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig Sonoclock 990 IP in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig Sonoclock 990 IP

Grundig Sonoclock 990 IP User Manual - German - 20 pages

Grundig Sonoclock 990 IP User Manual - Dutch - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info