569638
6
Zoom out
Zoom in
Previous page
1/10
Next page
Setting the clock automatically
The time and the day of the week can be set
automatically when receiving an RDS station which
transmits the clock time (CT) information.
This information (when available) is transmitted by
the RDS radio stations once every minute.
The clock is set within one or two minutes, if the
RDS station has enough signal strength.
Switch on the radio with the ON/OFF button.
Search for an RDS station using the >> (forward)
or << (backward) buttons.
Release the buttons when the symbol lights
up steadily on the display (see 'Radio').
The Auto-Time indicator ( ) flashes, indicating
that the set is waiting for the time signal.
The indicator stops flashing when the time
and day of the week is set. The quartz clock
starts to run with the received time.
If the clock is not set after 3-4 minutes, try
another RDS station.
The clock time and day of the week are updated
automatically each time the radio is switched on
and when you tune to an RDS station, as long as
the Auto Time function is enabled.
To enable and disable this function, the radio
must be switched on.
To disable the Auto-Time function, press the TIME
button for 3 seconds.
To enable the function again, press the TIME
button for another 3 seconds.
Ȅ
Ȅ
Setting the clock time manually
Make sure that the radio is off.
Press the TIME button and hold it pressed.
Set the clock time with the << or >> buttons.
A single press of the respective button switches
to the next or preceding minute.
If the button is held pressed, the setting changes
rapidly (after 4 seconds, at higher speed).
Setting the day of the week manually
Make sure that the radio is off.
Press and hold down the SNOOZE button and
set the day of the week with the <</>> buttons
(in the same way as the clock time).
Setting the alarm time
Your Sonoclock 610 allows you to set two different
alarm times (for example, for two different persons).
You can also combine different alarm modes for
each of the alarms (e.g. Alarm 1 with sound signal
and Alarm 2 with radio, etc.).
Press the AL 1 or AL 2 button.
The display shows the present alarm time.
Press and hold down the AL 1 or AL 2 button
and set the alarm time with the <</>> buttons (in
the same way as the clock time).
Displaying the alarm time
The alarm time can be checked with the DISPLAY
button, without changing the alarm mode:
Make sure that the radio is off.
Press DISPLAY once to see the alarm time 1 and
twice to see alarm time 2.
CLOCK SETTING
12
SC610 page 12
GB
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig Sonoclock 610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig Sonoclock 610 in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig Sonoclock 610

Grundig Sonoclock 610 User Manual - German - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info