700813
8
Zoom out
Zoom in
Previous page
1/11
Next page
ENGLISH
17
SETTINGS
____________________________
Manual settings
Setting the clock
When the device is switched on for the first time and no time signal is recei-
ved the clock starts with »00:00« in the display. The same applies after a
power failure, or if the device has been unplugged and no back-up batte-
ries have been inserted.
1 Press and hold down »TIME«.
2 Press »
<« or »>« briefly to set the time step-by-step or hold down to
run through the hours quickly.
3 Release »TIME« to conclude the setting.
– Display: the current time.
Setting the time zone
1 When the device is switched off, press »TIME« and hold it down.
2 Set the time zone with »SLEEP« (scale: »+0«,.»01«, »02«, »-02« and
»-01«).
– Display: e.g. »+2«.
Note:
If no support battery is inserted, the time is automatically set using
the DCF time synchronisation after a power cut, if the DCF reception is
sufficient for this. Alarm time and time zone synchronisation are each
rest to the values » 00:00« and » 00«. Please note that in such a case
you may be awoken by the alarm at the wrong time.
Setting the alarm time
1 Press »ALARM« and hold it down.
– Display: the last alarm time set.
2 Press »<« or »>« briefly to change the alarm time step-by-step or
hold down to run through the hours quickly.
3 Release »ALARM« to conclude the setting.
4 Use the slide switch »RADIO
9
ɷ
e ALARM« (on the left
side of the device) to set the alarm signal you require (»
ɷ
« = radio
station, »e« = signal tone).
– Display: the »ALARM
« LED lights up, which means the alarm set-
ting is activated.
The device switches on at the set alarm time with the selected alarm
signal.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig Sonoclock 53 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig Sonoclock 53 in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig Sonoclock 53

Grundig Sonoclock 53 User Manual - German - 11 pages

Grundig Sonoclock 53 User Manual - Dutch - 10 pages

Grundig Sonoclock 53 User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info