DEUTSCH
15
ENGLISH
15
SETTINGS
__________________________
Setting the clock
When you switch on the device for the first time, the time flashes in the
display to indicate that you must set the clock. The same thing applies after
a power failure, or if the device has been unplugged and no back-up
batteries have been inserted.
1 Press and hold down »TIME«.
2 Press »HOUR« briefly to set the hours step-by-step or hold it down to
run through the hours quickly.
3 Press »
MIN
« briefly to set the minutes step-by-step or hold it down to
run through the minutes quickly.
Note:
When the minute display changes from »59« to »00«, this does not
affect the hour display.
4 Release »TIME« to conclude the setting.
– Display: the current time.
Setting the alarm time
1 Press and hold down »ALARM«.
– Display: the last alarm time set.
2 Press »HOUR« briefly to set the hours step-by-step or hold it down to
run through the hours quickly.
3 Press »
MIN
« briefly to set the minutes step-by-step or hold it down to
run through the minutes quickly.
4 Release »ALARM« to conclude the setting.
5 Use the slide switch »RADIO
•
9
ɷ
e ALARM« (on the left
side of the device) to set the alarm signal you require (»
ɷ
« = radio
station, »e« = signal tone).
– Display: the »ALARM
•
« LED lights up red, which means the
alarm setting is activated.
– The device switches on at the set alarm time with the selected alarm
signal.
