570322
11
Zoom out
Zoom in
Previous page
1/15
Next page
ENGLISH24
OPERATION _____________________________
Notes
Upon delivery, the glass jar
E
, lid
C
,
measuring cup
A
, sealing rings
D
H
,
cutter unit
I
and the jug base
G
are
already assembled.
Preparation
Remove all packaging and stickers materials
and dispose of them according to the
applicable legal regulation.
Prior to first use
The parts must be cleaned prior to first use.
To do this, proceed as follows:
1 Take the entire unit off the motor housing
J
and place it on a level surface, e.g. on the
kitchen counter.
2 The lid
C
can be removed from the glass
jug by pushing on it lightly upwards with
your thumb.
3 Turn the measuring cup counter clockwise
as far as it will go and take it upwards out
of the lid opening
B
.
4 Take the sealing ring
D
off of the lid. Due
to its flexibility, the sealing ring can be lifted
off with your fingers. Do not use any tools
as this could damage the sealing ring.
5 Now set the glass jug with the opening
facing down on a level surface.
6 Take off the jug base by turning it counter
clockwise until it comes off (see diag.). The
cutter unit inside the jug base stays in the
glass jug.
7 The cutter unit can now carefully be lifted
out of the jug (see diag.). The sealing ring
H
can now be removed from the cutter unit.
Caution
The blades are very sharp. Therefore do
not touch the cutter unit with your fingers.
Risk of injury!
8 Clean all parts, with the exception of the
motor housing as described in “Cleaning
and Care”.
9 Then re-assemble the jug blender in the
reverse order. Set the glass jug with the
opening facing down on a level surface.
10 Lay the cutter unit sealing ring in the middle
on the glass jug.
11 Then insert the cutter unit with the blades
evenly into the opening of the base of the
glass jug (see diag.). Push down a little so that
the sealing ring presses onto the cutter unit.
12 Screw the jug base onto the glass jug by
turning it clockwise (see diag.). Hold the jug
handle
F
and screw the jug base on tightly.
13 Put the sealing ring on the lid. Make sure that
the sealing ring is sitting on the lid evenly.
14 Press the lid levelly onto the glass jug.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig SM 5040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig SM 5040 in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig SM 5040

Grundig SM 5040 User Manual - German - 16 pages

Grundig SM 5040 User Manual - Dutch - 15 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info