544916

Grundig SIS 7040 Manual

6
Zoom out
Zoom in
Previous page
1/10
Next page
ENGLISH
19
OPERATION _______________________________
- The red power indicator light
N
and the
blue steam button indicator light LOW
P
go out.
8 Let the appliance cool down in a location that
is safely out of reach of children.
Filling of the water tank
Note
The water tank can be relled at any time
during use.
1 Pull the water tank out of the steam iron. To do
this, grab the handle
V
underneath the water
tank.
2 Open the cover of the water lling opening
F
and ll the water tank with tap water or
distilled water up to the
MAX
marking. The
maximum lling quantity is 1.7 litres.
3 Close the cover of the water lling opening
and push the water tank completely into the
steam ironing station. Make sure that it clicks
into place properly and is secured to the
housing of the steam ironing station.
Caution
Do not move or shake the steam ironing station
when the water tank is being lled. Water might
spill out from the opening in the water tank.
4 Press the steam jet button briey to reset the
iron. After about 10 seconds the iron will be
ready for steam ironing.
Notes
When the water tank is empty, it allows air to
enter the pump at which time a louder than
normal 'pumping' sound can be heard.
If your tap water is very hard it is recommended
that the tap water is mixed with distilled water
on a 50:50 ratio, or use distilled water only.
Steam ironing
1 Place the appliance on an even, dry and non-
slip surface. The non-slip feet
U
ensure the
stability of the device.
2 Fill the water tank as described in the section
Filling the water tank.
3 Insert the power plug into the wall socket.
4 Push the on/off switch
S
to switch on the
steam ironing station.
- The power indicator
N
lights up red and
the blue steam button indicator light blinks
on LOW
P
.
5 Adjust the temperature control dial to the
desired temperature.
- The temperature indicator light
K
lights up
blue. The blue temperature indicator light
K
remains on while the iron is heating
up. As soon as the iron reaches the set
temperature, the temperature indicator light
goes off. The temperature indicator light will
go on and off during usage to indicate that
the set temperature is being regulated.
Note
Steam ironing is only possible at higher
temperature settings between  and
MAX.
6 The water in the water tank heats up within 3
minutes. As soon as the temperature indicator
light goes out and the control indicator in the
steam button stays lit, the steam iron is ready
to use. Hold the iron in horizontal position at
the garments and press the steam jet button
H
.
Continue to move the iron when ironing.
Caution
Never direct the steam at people or pets.
Note:
When the steam ironing station is switched
on it will produce a 'pumping' sound. This
is normal and indicates that water is being
pumped from the water tank into the steam
ironing station.
7 Select a higher steam level with the steam
buttons MEDIUM
Q
or HIGH
R
.
- The corresponding control indicator in the
steam button blinks as soon as it is selected.
After approx. 2 minutes the control indicator
will stay lit, indicating that the device is
ready for steam ironing.
… 6 …


Need help? Post your question in this forum.

Forumrules
1

Forum

grundig-sis-7040

Reset search

  • Hej.
    Er det muligt at bestille en bund skruge?
    Den er markeret med W i brugsanvisning.
    Mvh. Jesper Grusgaard Submitted on 24-9-2021 at 22:23

    Reply Report abuse

  • Hej.
    Er det muligt at bestille en bund skruge, den der er markeret med W i brugsanvisning.
    Mvh Jesper Grusgaard Submitted on 24-9-2021 at 22:21

    Reply Report abuse

  • I havé a grundig premium line SIS 9450. There is no steam coming from the iron
    Submitted on 30-7-2021 at 19:04

    Reply Report abuse

  • My grundig steam station is not working after changing anti-calc cartridge. The sign keep on blinking after plugging it to the Electrecity. Submitted on 25-6-2021 at 09:11

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig SIS 7040 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig SIS 7040 in the language / languages: English as an attachment in your email.

The manual is 1,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig SIS 7040

Grundig SIS 7040 User Manual - German - 14 pages

Grundig SIS 7040 User Manual - Dutch - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info