16
SWITCHING ON, SELECTING SERVICES
_______
Switching the satellite receiver on and off
1 Switch the satellite receiver on by pressing any key on the remote control.
ON: in the display appear at first 4 horizontal lines »
----
«, and then
the number of the selected service position.
To switch the satellite receiver back in standby, use the »
Ǽ
« button on the
r
emote control or on the satellite receiver.
OFF/standby: in the display the red indicator is lit.
Note:
Each time when switching on and when changing the service position, an
on-screen display briefly gives you the following information: current TV,
radio or favourite service, service position number, station name,
programme with digital sound service, number of the Favourites list, title of
the current programme, current time, start and end time of the current pro-
gramme, and title of the following programme.
Selecting service positions
1 Repeatedly press the »
P+, P-
« buttons on the satellite receiver or the remote
control to select the service positions step by step.
2 Keep the »
P+, P-
« buttons on the satellite receiver or on the remote control
pressed to scroll the service positions at high speed.
3 Enter multi-position service position numbers within 3 seconds using the
numeric buttons »1...0« on the remote control then call up the service
position directly using the »OK« button.
4 Call up the desired »Channel Lists TV, Radio or Favourites User 1 to 4«
using the yellow »
@
« button on the remote control, select the desired
service using the »
P+, P
« buttons, and finally call it up with the »
OK
«
button.
5 Go back to the last selected TV or Radio service by pressing the »
E
«
button.
