712290

Grundig SI 4550 Manual

22
Zoom out
Zoom in
Previous page
1/80
Next page
22
ENGLISH
OPERATION ______________________________
Lime removing feature
(Self-Clean)
It minimizes the lime particles accumulated in
the steam reservoir of your iron.
Use the self-clean feature once in every 2 to 3
weeks. If the water in your region is very hard (if
lime particles fall down from the soleplate of the
appliance), we recommend to use the self-clean
function more frequently.
1 Unplug your iron.
2 Fill the water tank up to the MAX mark.
3 Plug in the appliance to a grounded wall
socket and set the temperature setting dial to
MAX.
4 Unplug the iron when the thermostat warning
light
B
turns off.
5 Hold the iron over the sink and press self
clean button
D
. During this process, the water
in the water tank comes down into the steam
generation reservoir quickly and is released
through the soleplate holes along with the lime
particles (if any).
6 When the entire amount of water is discharged
from the tank, release the self clean button
D
.
If the iron still contains impurities, repeat this pro-
cess.
7 After the lime removal process is completed;
plug in the iron and make sure that the iron
soleplate is heated. When the iron reaches to
the adjusted ironing temperature, unplug the
appliance and gently iron on an old cloth.
Keep ironing until the water and lime stains left
on the soleplate are removed. Wait until the
iron cools down before storing it.
Caution
7
Do not add vinegar etc. and other lime
removing substances into the water tank.
Lime protection system
(Anti-Calc)
The lime protection system in the water tank of
your iron prevents clogging of the steam holes.
Lime protection system is always active and there
is no need to replace it.
Automatic shutdown
7
If the appliance is hold stationary for 30 sec-
onds while in horizontal position, it will be au-
tomatically turned off.
7
If the appliance is hold stationary for 7-10 min-
utes while in upright position, it will be automati-
cally turned off.
7
If the appliance is hold stationary for 30 sec-
onds while in a leaned (right or left) position, it
will be automatically turned off.
7
If the appliance is moved in horizontal position
it will be turned on..
1 To reheat the iron, lift it up and move it gently.
The thermostat warning light
B
turns off.
2 When the temperature of the soleplate falls
under the set iron temperature, the thermostat
warning light
B
illuminates.
3 If the thermostat warning light
B
is illuminated
after moving the iron, wait until it turns off again
before starting to iron.
Note
7
If the thermostat warning light
B
is not illumi-
nated after moving the iron, the soleplate is
still at the required temperature and the iron is
ready to use.
7
In case of automatic turn off the auto-off light
B
flashes.
7
It may take 60 seconds for the soleplate
E
to
reach the previously set temperature.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig SI 4550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig SI 4550 in the language / languages: English, German, French, Polish, Turkish, Spanish as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info