16
CODING
__________________________________________________________________________________________________________
ENGLISH
16
ENGLISH
The code number for the device can be found on
the identity card. Coding is not activated by
default. When the coding is activated, the dev-
ice is electronically secure. Following removal, it
can only be switched on again if the code num-
ber is re-entered.
Activating coding
1 Select the EXPERT level by pressing SOUND
until EXPERT appears in the display.
2 Select »Protection« using the volume
knob.
3 Press SOUND briefly.
– Display: »----« flashes.
4 Enter the code number by pressing memory
buttons »1« – »4« repeatedly.
Renewed operation when
coding is active
1 Switch on the car radio.
– Display: temporarily »SAFE«, then
»1----«.
– The »1« indicates the number of attempts
at entering the code.
2 Enter the code number using the station but-
tons »1«, »2«, »3«, »4«.
3 Press SOUND to confirm your entry.
– The radio is in operating mode.
Note:
Only enter the correct code number! Take
note of the increasing waiting time between
attempts.
After the sixth failed attempt we recommend
that you have a specialist dealer enter the
code.
The waiting time not elapsed is displayed.
Example: Code number 1703
»1« Press briefly once »1000«
»2« Press briefly seven times »1700«
»3« Press briefly ten times »1700«
»4« Press briefly three times »1703«
5 Briefly press SOUND to confirm.
– Display: »SAFE« – Coding is activated.
6 To quit the EXPERT level hold down SOUND
until you hear the signal.
Deactivating coding
1 If, for example, you want to remove the dev-
ice, select the EXPERT level and select
»SAFE« on the display.
2 To deactivate the coding, repeat steps 3 to 6.
