461406

Grundig SCD 5410 Allixx Manual

7
Zoom out
Zoom in
Previous page
1/22
Next page
BASIC FUNCTIONS
________________________________________________________________________________________
ENGLISH
7
Switching on and off
1 To switch on and off press »IO«.
Caution:
When the radio is switched on the automatic
antenna extends. Therefore switch off the
device before entering a car wash!
Volume and tone
settings
Setting the volume
1 Adjust the volume with the volume knob.
– Display: current volume setting
(scale from »0« to »30«).
Tone settings
For »BASS«, »TREBLE«, »FADER«, »BALANCE«:
1 Press SOUND until the function is selected.
2 Select the desired setting using the volume
knob.
Calling up the settings
Press SOUND, then press briefly, for example,
memory button 2.
The display shows: »SOUND 2«.
Calling up the middle setting
Press SOUND, then the
I
I
I
button.
The display shows: »LINEAR«.
All the settings are set to the middle values.
The loudness function is switched on.
Switching loudness on and off
The LOUD (Loudness) function raises the bass
and treble levels to improve the sound at low
volumes.
1 Press SOUND and BASS appears in the.
2 Press the upper soft key »LD«.
– LOUDNESS is activated. The symbol is
highlighted.
3 Press the lower soft key »LIN«.
– LOUDNESS is deactivated.
– Adjust the bass setting with »BASS«
– Change the treble setting with »TREB«
– »FAD« enables you to balance the volume
between the front and rear loudspeakers
– »BAL« enables you to balance the volume
between the left and right loudspeakers
3 To finish the setting keep pressing the
SOUND button until the selected station
appears in the display.
Sound memory
You can store your personal sound settings on the
memory buttons 1 – 5 and call them up whenever
you want. You can store the settings for Bass, Treble,
Fader, Balance and Loudness and call them up
whenever you want.
Note:
The information for BASS and TREB is stored for
each input source. The SOUND information
stored on the memory buttons is independent of
the input source selected.
Setting and storing
When you are in the »SOUND« setting mode,
press a memory button until you hear the signal.
The display shows: »SOUND 1«.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig SCD 5410 Allixx at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig SCD 5410 Allixx in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig SCD 5410 Allixx

Grundig SCD 5410 Allixx User Manual - German - 22 pages

Grundig SCD 5410 Allixx User Manual - Dutch - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info