30
Checking the alarm times
You can check the two alarm times while in other modes, for example radio
mode, without blocking the alarm function.
1 Press »e1« once.
– Display: Alarm type, alarm time 1 and the selected day of the week.
2 Press »e2« once.
– Display: Alarm type, alarm time 2 and the selected day of the week.
Note:
The next alarm time is always shown in the display, regardless of the
selected operating mode.
The indicator »ALARM 12« shows whether both alarm times (»ALARM
12«) or only one (e.g. »ALARM 2«) is active.
Interrupting and repeating alarm
You can interrupt the alarm function – regardless of the alarm type selected.
After 5 minutes, the alarm sounds again.
1 Press »SNOOZE« to interrupt alarm.
– Display: for example, »ALARM 1 ɷ « and »Z
z
« flash.
Note:
The alarm function can be interrupted as often as possible within the
90 minute alarm duration. When using alarm with radio programme
and signal tone, only the signal tone is interrupted for ca. 5 minutes.
Cancelling alarm for the day
1 Cancel alarm with »ON/OFF«.
– The alarm function is cancelled for the rest of the day, the alarm
sounds at the time of the next set alarm programme.
Switching off alarm for the weekend
You can switch off the alarm function over the weekend. The entered alarm
times are saved.
1 Switch off alarm with »WEC«.
– Display: » « and the next day with alarm, for example » «.
2 Re-activate the alarm function by pressing »WEC«.
– The indicator » « disappears and the next day with alarm is for
example » «.
SAT
WEC
MONWEC
ALARM MODE
____________________________________________
gF VOL 14
•
FM 91.0 MHz
ALARM 1
7:30 M 1
ɷ
MON TUE THU FRI SAT SUN
gF Vilradio
•
FM 91.0 MHz
ALARM 12
7:30
ɷ
THU
gF Vilradio
•
FM 91.0 MHz
ALARM 2
8:00
h
WED
g 15.06 FRI
Ǽ 7:31
ALARM 12
7:30
Z
Z
ɷ
gF 15.06 FRI
•
FM 9.20
ALARM 12
7:30
ɷ
MON WEC
gF 15.06 FRI
•
FM 9.20
ALARM 12
7:30
ɷ
SAT
