ENGLISH
35
Creating a track memory
You can create a track memory of up to 20 tracks for the current CD in any order you choose
and then play them back in that sequence. A track may be stored more than once. Program is
only possible in the stop position.
Selecting and storing tracks
1 Press »PROG/MEM« to call up the function.
– Display: »00« for the first preset position and »MEMORY« or »MEM« are flashing.
2 Select the track by pressing »DOWN
8« or »UP 9«.
3 Press »PROG/MEM« to save the track.
– Display: »00« for the second preset position and »MEMORY« or »MEM« are flashing.
4 To store more tracks, repeat steps 2 to 3.
Playing back a track memory
1 Start the track memory by pressing »PLAY/PAUSE
ı
II«.
– Playback begins with the first programmed file or track.
2 Press »STOP
7
« to end playback.
3 To play the track memory again, press »PROG/MEM« and afterwards »PLAY/PAUSE
ı
II«.
Changing the track selection
1 In stop mode, keep pressing »PROG/MEM« until the number of the track you want to
replace appears in the display.
2 Select the number of the new track by pressing »DOWN 8« or »UP 9«.
3 Press »PROG/MEM« to save the new track.
Adding tracks
1 In stop mode, press »PROG/MEM« until the preset number shown in the display is
zero.
2 Select the number of the new track by pressing »DOWN 8« or »UP 9«.
3 Press »PROG/MEM« to save the new track.
Deleting the track memory
The CD must be in the stop position.
1 Press »OPEN/CLOSE« to open the CD compartment;
or
– press »PROG/MEM«.
– press »STOP
7
«.
– move the »CD TAPE/OFF RADIO« switch to the »RADIO« position.
– move the »CD TAPE/OFF RADIO« switch to the »TAPE/OFF« position.
CD MODE (RRCD 2410/2420 MP3)__________
