ENGLISH
23
Power supply
Mains operation
Note:
Check that the mains voltage on the type plate (on the bottom of the device) corresponds
to your local mains supply. If this is not the case, contact your specialist dealer.
1 Plug the mains cable supplied into the »AC
~
« socket on the back of the device.
2 Plug the power cord into the wall socket.
Caution:
The only way to disconnect the device from the mains supply is to pull out the plug.
Battery operation
1 Open the battery compartment on the bottom of the device by pressing the mark and
removing the lid.
2 Insert six batteries (6 x 1.5 V, type IEC R20/UM1/D size), observing the polarity marked
on the lid of the battery compartment.
Notes:
Remove the batteries when they are flat or when you know that the device will not be
used for a long period of time.
The manufacturer accepts no liability for damage resulting from leaking batteries.
The batteries are switched off during mains operation.
Environmental note:
Batteries, including those which contain no heavy metals, may not be disposed of with
household waste. Please dispose of used batteries in an environmentally responsible
manner. Find out about the legal regulations which apply in your area.
Putting in backup batteries (RRCD 1310)
During mains operation, the back-up batteries ensure that stored settings are not lost in the
case of a power failure or when the device is briefly disconnected from the mains.
1 Open the backup battery compartment inside the battery compartment by pressing the
catch and removing the lid.
2 When inserting the batteries (2 x 1.5 V, type IEC R6/UM3/AA), observe the polarity
marked on the base of the battery compartment.
OVERVIEW ______________________________________________________
