673401
10
Zoom out
Zoom in
Previous page
1/44
Next page
Compact Cassettes
For recording, use a NORMAL
cassette (IEC type I) on wich the
tabs are not broken out.
This deck is not suited for
recording on CHROME (IEC II)
or METAL (IEC IV) cassettes.
For playback, any cassette type
may be inserted.
At the very beginning and end
of the tape, no recording will
take place during the 7 seconds
when the leader tape passes the
recorder heads.
To prevent the accidental erasure
of a recording,
keep the
cassette side to
be safeguarded
in front of you
and break out the left tab. Now,
recording on this side is no
longer possible.
To render this safeguard
ineffective, cover the aperture
with a piece of adhesive tape.
Do not expose the cassettes to
rain, moisture, sand, or to
excessive heat e.g. from heating
equipment or in motor cars
parked in the sun.
Cassette playback
Set the MODE selector to TAPE.
Press STOP/EJECT 9// to open
the cassette
compartment.
Insert a
recorded
cassette.
For fast winding, press
F.FWD Q or REW R.
To stop, press STOP/EJECT 9//.
Press PLAY A and playback will
start.
Adjust the sound using the
controls VOLUME and UBS.
You may connect stereo head-
phones with 3.5 mm plug to
socket
p.
The loudspeakers are then muted.
To interrupt playback press
PAUSE ;.
To continue playback, press
PAUSE ; again.
When the end of the tape is
reached, the recorder buttons
are released.
Press STOP/EJECT 9// if you
want to stop playback before
the end of the tape.
On pressing again, the cassette
compartment will open.
The set is switched off if the
MODE selector is in TAPE
position and no buttons are
pressed.
1
Cassette recording
Copyright: Recording is permissible insofar as copyright or other rights of
third parties are not infringed.
Press STOP/EJECT 9// to open the cassette compartment.
Insert the cassette.
When monitoring during recording, adjust the sound
using the controls VOLUME and UBS. These controls do
not affect the recording.
Recording from the radio
Set the MODE selector to RADIO.
Select the wave band using the BAND switch.
Tune to desired radio station using the TUNING control.
If during the recording of a AM/MW (LW) station, a whistling sound is
heard, this sound can be suppressed by setting the BEAT CUT switch to
another position.
Mono recording from the built-in microphone
Set the MODE selector to TAPE.
Set the VOLUME control to the minimum volume level (during microphone
recording , monitoring is not possible).
Starting and stopping the recording
Start recording by pressing OTR 0 (the PLAY A button is automatically
also pressed).
For brief interruptions, press PAUSE ;.
To restart recording, press this button once more.
When the end of the tape is reached, the recorder buttons are released.
Press STOP/EJECT 9// if you want to stop recording before the end of
the tape.
On pressing again, the cassette compartment will open.
The set is switched off if the MODE selector is in position TAPE and no
buttons are pressed.
CASSETTE DECK
10
GB
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig RR 316 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig RR 316 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info