755988

Grundig RCD 1500 BT Manual

24
Zoom out
Zoom in
Previous page
1/70
Next page
ENGLISH
24
Antennas
1 For FM stations (VHF) extend the telescopic antenna.
Note:
7
If the FM signal is too strong, it is advisable to push
in the telescopic antenna.
Selecting the radio input source
1 Press the ON/OFF button briefly to power on the
device
2 Move the »Bluetooth/CD/USB/RADIO« switch
to the »RADIO« position.
Setting and storing radio stations
Automatic tuning station (ATS)
1 Activate the ATS by pressing PROG/MEM/STOP
button until the frequency display changes to rapid
run through.
–The device searches for up to 20 radio stations
and then saves them. After the search has finished,
the station stored in position 01 can be heard.
Automatic station search
1 Activate the station search by pressing »DOWN «
or »UP « until the frequency display changes to
rapid run-through.
– The search stops when a station is found.
Manual station search
1 To move the frequency backward/forward in steps,
briefly press »DOWN « or »UP « several times.
– The frequency changes in steps of 50 kHz.
RADIO MODE ________________________________
Storing stations on station positions
Up to 20 stations in the FM band can be stored.
1 Press »DOWN « or »UP « to select the station.
2 Press »PROG/MEM/STOP« button briefly to acti-
vate the memory function.
3 Select the desired station position with
»ALBUM MEMORY UP« or
»ALBUM MEMORY DOWN«.
4 Press »PROG/MEM/STOP« button again to save
the station
5 To store more stations, repeat steps 1 to 4.
Note:
7
You can replace a station on a preset with a new
one by carrying out steps 1 to 4 as described
above.
Selecting a preset position
1 Select the station preset position with »ALBUM/MEM-
ORY /UP« or »ALBUM/ MEMORY /DN«.
Stereo/mono reception
If the device receives an FM stereo station, »)« ap-
pears in the display. However, if the signal from the FM
stereo station is weak, you can improve the sound qual-
ity by switching to mono reception.
1 Switch to mono reception by pressing
»MODE/ MONO/ST.«.
2 Switch to stereo reception by pressing
this button again.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig RCD 1500 BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig RCD 1500 BT in the language / languages: English, German, French, Polish, Spanish as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info