479222
18
Zoom out
Zoom in
Previous page
1/19
Next page
ENGLISH
32
Troubleshooting
If a fault occurs, first refer to this information before you
take the device for repair.
If you are unable to rectify the fault using the informa-
tion given here, contact your local dealer or service
specialist.
Under no circumstances should you attempt to repair
the radio recorder yourself, as this would invalidate the
guarantee.
INFORMATION ______________________________________________________
PROBLEM
POSSIBLE CAUSE
REMEDY
GENERAL INFORMATION
No sound
The volume setting is too low
The headphones are connected
The batteries are flat
The batteries are incorrectly inserted
The mains cable is incorrectly connected
Adjust the volume, unplug the
headphones
Replace the batteries, insert then
correctly
Connect the mains cable properly
The device does not respond to button
commands
The device suffers malfunctions during
playback
Static electrical discharge or electrical fast
transient (burst)
Switch off the device, disconnect the
mains cable and plug it in again after
a few seconds
Remove any batteries
RADIO
Poor radio reception
Weak radio antenna signal
Interference from electrical devices such
as televisions, video recorders, computers,
neon lamps etc.
VHF (FM): tilt and turn thetelescopic
antenna
MW: turn whole device
Keep radio recorder away from
electrical devices
CD
Playback will not start
The CD is damaged or dirty
Replace or clean the CD
The CD player skips tracks A stored track memory is being played
The RANDOM function is activated
Switch to normal playback or delete
Switch off the RANDOM function
CD-Rs or CD-RWs are not being
played back, or being played back
incorrectly
The CD is faulty or the software or
hardware settings were incorrect during
burning
Check the components of your CD
burner / burner software or change
the CD you are using
MP3
MP3 CD plays too fast or slowly
The sampling frequency of 44.1 kHz was
not used
Burn a new MP3 CD using the correct
sampling frequency
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig RCD 1440 USB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig RCD 1440 USB in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig RCD 1440 USB

Grundig RCD 1440 USB User Manual - German - 18 pages

Grundig RCD 1440 USB User Manual - Dutch - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info