479228
15
Zoom out
Zoom in
Previous page
1/32
Next page
15
ENGLISH
SETTINGS
---------------------------------------------------------------------------------------------------------------------------------------
Automatic tuning search for FM
radio stations (ATS)
After connecting the hi-fi system to the mains
power for the first time, the automatic tuning
search begins. It searches for radio stations and
can save up to 40 presets.
Display: the frequency in rapid run-through
and the preset.
After the search, the demo mode is started au-
tomatically. This shows you the functions of the
hi-fi system. Press »8« button to exit the demo
mode. The hi-fi system then switches to the pre-
set 1.
Notes:
7
The hi-fi system first saves RDS stations and
then normal FM stations.
7
The automatic station search can also be
stopped by pressing »8«.
7
Some RDS stations transmit an RDS time sig-
nal. If the selected RDS station transmits time
information, the time is updated automati-
cally provided that »CT« is set to »ON«. This
takes about five minutes.
Setting the clock – manually
The first time you connect the hi-fi system to the
mains, time can be set manually, as not all radio
stations transmit the RDS time signal.
1 In standby mode, press »TIME« on the remote
control, once to select 12 hours format, twice
to select 24 hours format.
Display: »12 H« or »24 H«.
2 Press and hold down »TIME« until the hours
digits flash on the display.
– Display: the hours flash.
3 Set the hours by rotating the Jog-Shuttle on
the remote control and confirm with »TIME«
on the remote control or by pressing the Jog-
Shuttle.
– Display: the minutes flash.
4 Set the minutes by rotating the Jog-Shuttle on
the remote control and confirm with »TIME«
on the remote control or by pressing the Jog-
Shuttle.
– Display: the year flashes.
5 Set the year by rotating the Jog-Shuttle on
the remote control and confirm with »TIME«
on the remote control or by pressing the Jog-
Shuttle.
– Display: the month flashes.
6 Set the month by rotating the Jog-Shuttle on
the remote control and confirm with »TIME«
on the remote control or by pressing the Jog-
Shuttle.
– Display: the day flashes.
7 Set the day by rotating the Jog-Shuttle on the
remote control and confirm with »TIME« on
the remote control or by pressing the Jog-Shut-
tle.
– Display: »CT« lights up and »ON« flashes.
8 Select the RDS time synchronisation by rotat-
ing the Jog-Shuttle on the remote control and
confirm with »TIME« on the remote control or
by pressing the Jog-Shuttle.
– Display: the current time and date.
Notes:
7
The time and date must be reset after a
power failure or after disconnecting from
the mains, when no RDS station is available
which supports clock synchronisation func-
tion.
7
Some RDS stations transmit an RDS time
signal. If the selected RDS programme trans-
mits this time information, the time on the sys-
tem is automatically updated. This may take
a few minutes.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Grundig Ovation 3 CDS 8120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Grundig Ovation 3 CDS 8120 in the language / languages: English as an attachment in your email.

The manual is 2,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Grundig Ovation 3 CDS 8120

Grundig Ovation 3 CDS 8120 User Manual - German - 32 pages

Grundig Ovation 3 CDS 8120 User Manual - Dutch - 33 pages

Grundig Ovation 3 CDS 8120 User Manual - French - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info