20
ENGLISH
POWER SUPPLY
___________________________________
Operation with recharge-
able batteries
When using the built-in recharge-
able nickel metal hydride batteries,
use the mains adapter supplied as a
charger.
1 Plug the mains adapter into the
socket, and plug the mains
adapter into the mains socket.
– During the charging process,
the indicator lights up
green.
– When charging has finished,
the indicator goes out.
Notes
7
Completely charge up the
batteries (16 hours) before you
first use them or if you have not
used them for a long time.
7
When switched off the charging
time is approximately 8 hours. If
you switch on the appliance while
it is charging, charging will stop.
7
The ambient temperature should
be between 5 °C and 40 °C.
G
G
H
7
When fully charged, the
appliance works for around
45 minutes. It is not advisable to
charge the batteries after every
use, especially if you do not use
the appliance for the full 45 min-
utes. Only charge the batteries
when they are completely
discharged. This increases their
life. Do not charge it every day.
Using the charging unit
1 Plug the socket of the
appliance into the plug in the
charging unit.
2 Plug the mains adapter lead into
the socket on the charging unit.
3 Insert the mains adapter plug in
the socket.
Environmental note
7
This appliance contains nickel
metal hydride batteries. Do not
dispose of it with your household
waste at the end of its service life.
Open the housing. Remove the
batteries and take them to a bat-
tery collection box in a shop or
public collection point.
H
