36
Creating a track memory
This function enables you to store up to 32 tracks on the current CD in a cer-
tain order and then play them back in that sequence. The same track may be
stored more than once.
Selecting, storing and playing back tracks
1 Place a CD in the CD compartment.
Note:
The device must be in the STOP position.
2 Press »PROGRAM/PROG.« to select the function.
– Display: »TR 00« and »P-01«, »PROGRAM« flashes.
3 Select the track using the »
5a
« and »
s6
« buttons.
– Display: e.g. »TR 03« (for the first track) and »P-0I« (memory position).
4 Press »PROGRAM/PROG.« to save the track.
– Display: the memory position. »TR 00«, »PROGRAM« flashes again.
Note:
Repeat steps 3 and 4 to programme more tracks.
5 To start playback of the track memory press »
ı
II«.
– Playback begins with the first programmed track.
Note:
If, when setting the time, no button is pushed for a period of longer than
10 seconds, the system will end the process automatically. You then have
to start again at the beginning.
Changing from the track memory to normal playback
1 To stop playback of the track memory press »
7
«.
– The total number of CD tracks appears in the display.
2 Press »
ı
II«.
– Normal playback begins at the start of the CD.
Note:
The track memory remains stored when you start normal playback.
Changing from normal playback to the track memory
1 Press »
7
« to end normal playback.
– The total number of CD tracks appears in the display.
2 Press » PROGRAM/PROG«.
– The first stored track appears in the display (e.g. »03 P - 01«) and
»PROGRAM« flashes.
3 To start playback of the track memory press »
ı
II«.
– Display: »PROGRAM«.
– Playback begins with the first programmed track.
CD MODE
_____________________________________________
FLAT
PROGRAM
TR
00 P - 01
CD
FLAT
PROGRAM
TR
03 P - 01
CD
FLAT
PROGRAM
TR
00 P - 02
CD
FLAT
PROGRAM
TR
03 P - 01
CD
FLAT
TR
12 58:14
CD
